From: ccie az (ccieaz@googlemail.com)
Date: Wed Jun 04 2008 - 15:25:17 ART
yes that's the problem :) I configured the domain on 1 switch and the
other 2 switches automatically applied this. But SW3 didnt.
I have fixed the issue now by removing the VTP password on the 3
switches. Then again erasing the vlan.dat on SW3 and reloading it,
this time it picked it up domain.
I guess i was too quick configuring the passwords before SW3 had
sync'ed with the domain.
Az
2008/6/4 Jonathan Greenwood II <gwood83@gmail.com>:
> SW3 doesn't have a domain name according to your output vs SW2 domain name
> you have configured of IE.
>
> On Wed, Jun 4, 2008 at 1:13 PM, ccie az <ccieaz@googlemail.com> wrote:
>>
>> Hi All,
>>
>> I am having some weird VTP issue at the moment where one of the 4
>> switches wont join the VTP domain. I have tired reloads of the switch,
>> deleting the vlan.dat file and even erasing the whole config and
>> starting again. But still it doesnt join the domain.
>>
>> Does anyone have any suggestions?
>>
>> Thanks
>>
>> Az
>>
>> Config:
>>
>> Rack1SW3#show vtp status
>> VTP Version : 2
>> Configuration Revision : 0
>> Maximum VLANs supported locally : 1005
>> Number of existing VLANs : 5
>> VTP Operating Mode : Server
>> VTP Domain Name :
>> VTP Pruning Mode : Disabled
>> VTP V2 Mode : Disabled
>> VTP Traps Generation : Disabled
>> MD5 digest : 0x57 0xCD 0x40 0x65 0x63 0x59 0x47 0xBD
>> Configuration last modified by 0.0.0.0 at 0-0-00 00:00:00
>> Local updater ID is 0.0.0.0 (no valid interface found)
>>
>> Rack1SW3#show int trunk
>>
>> Port Mode Encapsulation Status Native vlan
>> Fa0/16 on 802.1q trunking 255
>> Fa0/17 on 802.1q trunking 255
>> Fa0/18 on 802.1q trunking 255
>> Fa0/19 on 802.1q trunking 255
>> Fa0/20 on 802.1q trunking 255
>> Fa0/21 on 802.1q trunking 255
>>
>> Port Vlans allowed on trunk
>> Fa0/16 1-4094
>> Fa0/17 1-4094
>> Fa0/18 1-4094
>> Fa0/19 1-4094
>> Fa0/20 1-4094
>> Fa0/21 1-4094
>>
>> Port Vlans allowed and active in management domain
>> Fa0/16 1
>> Fa0/17 1
>> Fa0/18 1
>> Fa0/19 1
>> Fa0/20 1
>>
>> Port Vlans allowed and active in management domain
>> Fa0/21 1
>>
>> Port Vlans in spanning tree forwarding state and not pruned
>> Fa0/16 1
>> Fa0/17 1
>> Fa0/18 1
>> Fa0/19 1
>> Fa0/20 1
>> Fa0/21 1
>>
>> Rack1SW2#show int trunk
>>
>> Port Mode Encapsulation Status Native vlan
>> Fa0/13 on 802.1q trunking 255
>> Fa0/14 on 802.1q trunking 255
>> Fa0/15 on 802.1q trunking 255
>> Fa0/16 on 802.1q trunking 255
>> Fa0/17 on 802.1q trunking 255
>> Fa0/18 on 802.1q trunking 255
>>
>> Port Vlans allowed on trunk
>> Fa0/13 1-4094
>> Fa0/14 1-4094
>> Fa0/15 1-4094
>> Fa0/16 1-4094
>> Fa0/17 1-4094
>> Fa0/18 1-4094
>>
>> Port Vlans allowed and active in management domain
>> Fa0/13 1,6,12,36,43,45,258
>> Fa0/14 1,6,12,36,43,45,258
>> Fa0/15 1,6,12,36,43,45,258
>> Fa0/16 1,6,12,36,43,45,258
>> Fa0/17 1,6,12,36,43,45,258
>>
>> Port Vlans allowed and active in management domain
>> Fa0/18 1,6,12,36,43,45,258
>>
>> Port Vlans in spanning tree forwarding state and not pruned
>> Fa0/13 1,6,12,36,43,45,258
>> Fa0/14 1
>> Fa0/15 1
>> Fa0/16 1,6,12,36,43,45,258
>> Fa0/17 6,12,36,43,45,258
>> Fa0/18 6,12,36,43,45,258
>> Rack1SW2#
>> Rack1SW2#
>> Rack1SW2#show vtp st
>> Rack1SW2#show vtp status
>> VTP Version : 2
>> Configuration Revision : 6
>> Maximum VLANs supported locally : 1005
>> Number of existing VLANs : 11
>> VTP Operating Mode : Server
>> VTP Domain Name : IE
>> VTP Pruning Mode : Disabled
>> VTP V2 Mode : Disabled
>> VTP Traps Generation : Disabled
>> MD5 digest : 0x1C 0xF1 0xFF 0x56 0x51 0x65 0x42 0x6C
>> Configuration last modified by 0.0.0.0 at 3-10-93 03:35:46
>> Local updater ID is 141.1.0.8 on interface Vl258 (lowest numbered VLAN
>> interface found)
>>
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Jul 01 2008 - 06:23:20 ART