Re: Dot1x

From: Sadiq Yakasai (sadiqtanko@gmail.com)
Date: Tue Jun 03 2008 - 14:18:38 ART

• Next message: Mike Haddad: "RE: WCCP redirection IN or OUT"
• Previous message: Kiran Parashare: "Dot1x"
• Maybe in reply to: David Lonnie: "Dot1x"
• Next in thread: Muhammad Nasim: "Re: Dot1x"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi Kiran,

If you go to the switching command and config guide reference section and
under "Configuring IEEE 802.1x Port-Based Authentication" you should find
all that you need:

http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_44_se/configuration/guide/scg.html

HTH
Sadiq

• Next message: Mike Haddad: "RE: WCCP redirection IN or OUT"
• Previous message: Kiran Parashare: "Dot1x"
• Maybe in reply to: David Lonnie: "Dot1x"
• Next in thread: Muhammad Nasim: "Re: Dot1x"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue Jul 01 2008 - 06:23:20 ART