From: Adel Abushaev (adel@netmasterclass.net)
Date: Sat May 31 2008 - 18:14:19 ART
As is everything else, the direction is from the perspective of the
switch/router. Rx, ingress - into the switch/router; Tx, egress - out of the
switch/router.
Adel.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
ahmed badr
Sent: Saturday, May 31, 2008 9:57 AM
To: Athaide, Dwayne
Cc: ccielab@groupstudy.com
Subject: Re: RSPAN question
rx.
It's the same logic as access-list. with in=rx and out=tx.
2008/5/31 Athaide, Dwayne <DAthaide@epco.com>:
> If I need to span all traffic "coming from f0/1 and f0/2" would that
mean
> RX
> traffic or TX traffic. I have read the explanation in the DOC CD am still
> confused.
> Any help is much appreciated
>
>
> Thanks
>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2008 - 06:59:19 ART