From: S.M. Imran (shaikhimran@gbmpak.com)
Date: Fri May 30 2008 - 08:47:24 ART
Done. Thanks
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Thomas Fowles
Sent: Friday, May 30, 2008 4:31 PM
To: S.M. Imran
Cc: ccielab@groupstudy.com
Subject: Re: error disable
Imran-
How is the port on the far side configured? Is is sending BPDUs?
-Tom
CCIE#18762
http://www.linkedin.com/in/thomasfowles
On Fri, May 30, 2008 at 7:12 AM, S.M. Imran <shaikhimran@gbmpak.com> wrote:
> Hi guys,
>
>
>
> Just a simple one I have done on SW1 3560
>
>
>
> spanning-tree portfast bpduguard default
>
>
>
> interface GigabitEthernet0/23
>
> switchport access vlan 30
>
> switchport mode access
>
> spanning-tree portfast
>
>
>
> and connect it to another switch SW2 3560 but port is not going into
> error-disable state.
>
>
>
> Imran
>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2008 - 06:59:18 ART