From: Vazquez, Jorge (Jorge.Vazquez@acs-inc.com)
Date: Wed May 28 2008 - 13:49:34 ART
I think you may need to configure it as port-channel dst-mac on the SW1
port-channel interface.
Jorge
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
dailongli@aol.com
Sent: Wednesday, May 28, 2008 3:16 AM
To: ccielab@groupstudy.com
Subject: port-channel load-balance
Hi.all:
I have a question about port-channel load-balance.
This is my topology.
server--SW1======SW2. (sw1 is 3550,sw2 is 3560)
sw1 and sw2 are connected in trunk ,with portchannel 100.
There is a server connected to SW1,and divided into vlan 50.
There are many clients on SW2 in vlan 50 ,want to access the server.
So I configure port-channel load-balance dst-mac on SW1.
My question is that,Should I configure port-channel load-balance src-dst-mac
or
leave it default (src-mac)?
Is it better that load-balance based on src-dst-mac than src-mac?
thanks in advance.
Dailong
???
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2008 - 06:59:18 ART