From: ahmed badr (eng.ahmedbadr@gmail.com)
Date: Wed May 28 2008 - 12:30:32 ART
I agree with John.......minCIR= 64k, CIR=256k and NO Be.
2008/5/28 John <jgarrison1@austin.rr.com>:
> The task said throughput is 256k anything above 64k will have the de bit
> set during "congestion". I don't think that makes the cir 64k. I think it
> makes 64k the mincir and that when the interface recieves BECN's it will
> shape it down to 64k otherwise it will run at 256k. That means there is no
> be
> ----- Original Message ----- From: "Sadiq Yakasai" <sadiqtanko@gmail.com>
> To: "Rich Collins" <nilsi2002@gmail.com>
> Cc: "akyccie" <akyccie@gmail.com>; "Cisco certification" <
> ccielab@groupstudy.com>
> Sent: Wednesday, May 28, 2008 8:51 AM
> Subject: Re: frame relay shaping
>
>
>
> I would do this with these parameters:
>>
>> map-class frame-relay SHAPE
>> frame-relay cir 64000
>> frame-relay mincir 32000 (by default)
>> frame-relay bc 8000 (Bc = Tc * cir --> 0.125 * 64000 )
>> frame-relay be 24000 [(air - cir) * Tc] --> [(256000-64000) * 0.125]
>> frame-relay adaptive-shaping becn
>> !
>> int s1/0
>> frame-relay traffic-shaping
>> frame-relay class SHAPE
>>
>> HTH
>> Sadiq
>>
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2008 - 06:59:18 ART