Re: MSDP & MBGP

From: Paul Cosgrove (paul.cosgrove@heanet.ie)
Date: Mon May 26 2008 - 10:57:36 ART


Just to clarify the RPF check, it selects the route with the lowest AD
first. If multiple routes have the same AD, the list Thor mentioned is
then used to determine which type of route is selected.

So MBGP routes are preferred over unicast routes provided they both have
the same AD.

See:
http://www.cisco.com/en/US/tech/tk828/technologies_tech_note09186a0080094b55.shtml#noforwardrpffail

Paul.

<snip>
> As for the RPF source preference, your list is correct.
>
>
> Regards,
> Rado
>
>
> Thor Kopp wrote:
<snip>
>>Is my understanding correct here?
>>
>> 1. Static mroutes
>> 2. DVMRP routes
>> 3. MBGP routes
>> 4. Unicast routes
>>
>> - Thor
>>
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>

-- 
HEAnet Limited
Ireland's Education & Research Network
5 George's Dock, IFSC, Dublin 1, Ireland
Tel:  +353.1.6609040
Web:  http://www.heanet.ie
Company registered in Ireland: 275301

Please consider the environment before printing this e-mail.



This archive was generated by hypermail 2.1.4 : Mon Jun 02 2008 - 06:59:18 ART