From: Roman Rodichev (roman@iementor.com)
Date: Fri May 23 2008 - 17:18:31 ART
To all the folks who were wondering about c7200-p-mz.120-32.S6 image. Yes,
that is correct, it's no longer downloadable, but that *is* the image I was
talking about. The idle pc value I mentioned seems to be unusually better
than normal for that specific IOS image. I recommend contacting TAC to
acquire that image, as I don't feel comfortable distributing it.
Also, that idle pc works only with Dynamips version 0.2.8-RC1 or RC2, and
only for the 64 bit Linux version.
By the way, if anyone needs introduction to Dynamips, please go to
www.iementor.com and click on "Introduction to Dynamips"
Roman Rodichev
5xCCIE #7927 (R&S, Security, Voice, Storage, Service Provider)
Instructor, Content Developer. ieMentor Corporation
http://www.iementor.com
Y!M: roman7927
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of CCIE
CCIE
Sent: Monday, May 12, 2008 2:11 PM
To: Cisco Nuts; Joseph Brunner; 'Roman Rodichev'; 'Deepak Ahuja';
ccielab@groupstudy.com
Subject: RE: Dynamips for SP
I can't find this ios c7200-p-mz.120-32.S6 on cisco
Cisco Nuts <cisconuts@hotmail.com> wrote: Hi All:
Is it better to buy a laptop with dual-core and 4 GB of memory
or one with a quad-core(if one exits) and 2 GB of memory?
It seems that cpu is more important than memory (based on the discussion)
but
any input is appreciate.
Thx.
> From: joe@affirmedsystems.com
> To: roman@iementor.com; deeps.ccie@gmail.com; ccielab@groupstudy.com
> Subject: RE: Dynamips for SP
> Date: Sun, 11 May 2008 20:58:59 -0400
>
> Thank you young Master Jedi.
>
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Roman Rodichev
> Sent: Sunday, May 11, 2008 8:26 PM
> To: 'Deepak Ahuja'; ccielab@groupstudy.com
> Subject: RE: Dynamips for SP
>
> The secret sauce is c7200-p-mz.120-32.S6 (yes S6 only) and idle pc value
> 0x6065bddc
>
> Try them and you'll be very surprised
>
>
>
>
> Roman Rodichev
> 5xCCIE #7927 (R&S, Security, Voice, Storage, Service Provider)
> Instructor, Content Developer. ieMentor Corporation
> http://www.iementor.com
> Y!M: roman7927
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Deepak Ahuja
> Sent: Sunday, May 11, 2008 3:38 PM
> To: ccielab@groupstudy.com
> Subject: Dynamips for SP
>
> Hey Friends
>
> I need help with Dynamips with SP
>
> My system info
>
> Core2 duo - 2.2 GHZ | 2mb L2| 800 Mhz
> 4gb DDR2 - 800 Mhz
> Intel 965 Motherboard
> Win XP
>
> I am running 4 Instances of dynamips for IE lab Topology , Optimized Idle
pc
>
>
>
> The issue I am facing is after 8 router with All protocols, MPLS TE
> configured , CPU utilization is 100 % , I am able to use the LAB but I do
> see the protocols showing strange behavior.
>
> Please provide your valuable Inputs, All help is greatly appreciated
>
>
> Before writing this mail , I did check the archive on Dynamips - Saw a lot
> of suggestions for going with Linux 64 BIT but I cant really run linux
>
>
> Regards
>
> Deepak Ahuja
> CCIE#19545 R&S
>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2008 - 06:59:18 ART