From: lei tian (again.tl@gmail.com)
Date: Thu May 22 2008 - 18:20:04 ART
So dense mode traffic will be pushed out regardless of the mode of
interfaces is operating. That is good to know.
Thanks
Lei
On Thu, May 22, 2008 at 4:35 PM, Joseph Brunner <joe@affirmedsystems.com>
wrote:
> Without "no ip pim dm-fallback" implemented, what router will do with
> traffic in dense mode group, I mean which interface will the traffic be
sent
> out?
>
> >The ones that have received pim joins that are in the Outgoing interface
> list ;)
>
> Form my understanding, the router will check which interfaces are operated
> in dense mode then the traffic will be flood to all dense mode interfaces.
> If all interfaces are running sparse mode, then traffic will be sent out
> nowhere.
>
> >no. the group will simply flood and prune if you are using old old code.
> Lately, we have dense mode state refresh, so rather than flooding until a
> prune is heard, the router with a dense mode >group will not flood the
group
> if the group is not requested. Similar to sparse mode, except it is doing
it
> per group without an RP.
>
> >again the interface modes decide how the router learns rp information. Not
> how the multicast traffic is forwarded. I tested this in my lab last year
by
> running multicast traffic over a network of "sparse mode interfaces" with
no
> RP configured. I obviously did not remove the "ip pim dm-fallback" default
> operation.
>
>
> That will not make any difference after implement "no ip pim dm-fallback".
> That's why I said "no ip pim dm-fallback" doesnt do anything if all
> interfaces are running sparse.
> Correct me If I am wrong .
>
> >yes you are wrong the. The interfaces can do what ever they are configured
> to do the router forwards multicasts based on the properties of the groups
> in the mroute table, and then looks to see if "ip pim dm-fallback" is
> configured. That is why "ip pim dm-fallback" is a default command. If the
RP
> is lost due to interface MIS CONFIGURATION (i.e. using SPARSE with AUTO-RP
> and not using IP PIM AUTORP LISTENER, ETC) the traffic can still flow in
> dense mode for that group.
>
>
>
> Just read the whole univercd explanation of the ip pim dm-fallback command
> a couple of times. It will make sense to you.
>
>
>
> Thanks,
>
>
>
> Joe
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2008 - 06:59:18 ART