From: lei tian (again.tl@gmail.com)
Date: Tue May 20 2008 - 20:28:29 ART
Most likely this is a bug, you need to change your code.
On 5/20/08, John <jgarrison1@austin.rr.com> wrote:
>
> someone please explain what I'm doing wrong, see output below. everytime I
> give the interface level command ip authentication key-chain eigrp 100
> eigrp
> it erases my ip authentication mode eigrp 100 md5, and it's like I didn't
> enter the commands. This has to be something stupid.
>
> Thanks in advance
>
> interface FastEthernet0/5
> no switchport
> ip address 148.1.57.7 255.255.255.0
> end
>
> SW1(config-if)#ip authen mode eigrp 100 md5
> SW1(config-if)#do sh run int f0/5
> Building configuration...
>
> Current configuration : 123 bytes
> !
> interface FastEthernet0/5
> no switchport
> ip address 148.1.57.7 255.255.255.0
> ip authentication mode eigrp 100 md5
> end
>
> SW1(config-if)#ip authentication key-chain eigrp 100 eigrp
> SW1(config-if)#do sh run int f0/5
> Building configuration...
>
> Current configuration : 85 bytes
> !
> interface FastEthernet0/5
> no switchport
> ip address 148.1.57.7 255.255.255.0
> end
>
> SW1(config-if)#do sh key chain eigrp
> Key-chain eigrp:
> key 1 -- text "CISCO"
> accept lifetime (12:00:00 UTC Jan 1 2000) - (00:15:00 UTC Jan 1
> 2006)
> send lifetime (12:00:00 UTC Jan 1 2000) - (23:45:00 UTC Dec 31 2005)
> key 2 -- text "CISCO2006"
> accept lifetime (23:15:00 UTC Dec 31 2005) - (infinite) [valid now]
> send lifetime (23:45:00 UTC Dec 31 2005) - (infinite) [valid now]
>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2008 - 06:59:17 ART