From: Ibrahim kabir (kebramccie@live.com)
Date: Sat May 17 2008 - 06:21:07 ART
Suryakant,
I dont think it is the expected behaviour. I think but am not very sure as I
am also Studying for the R&S lab it has something to do with the ospf timers.
Have u tried clearing the ospf process after the metric manipulation on R1? It
myt work. Guys please Correct me if am wrongKabir K IbrahimB.sc CCNA CCNP CCDP
CCNP MCP+2348036477283> Date: Sat, 17 May 2008 12:44:27 +0530> From:
suryakant.pandian@gmail.com> To: ccielab@groupstudy.com> Subject: Manipulating
the installation of E2 routes> > Hi,> > I have three router R1,R2 and R3.They
are configured with ospf> point-to-multipoint network type.> > I get one E2 on
R1 from both the R2 and R3 with same metrics.> > R1 installs both the routes
in the routing table.> > My requirement was to have only the route from R2
installed in the routing> table.> > I used to following command under the
routing process to achieve it:> > distance 109 <router-id of r2> <wild-card
mask> <acl matching the network>> > This command was not taking effect and
both the routes were still installed> in the R1s table.> > But as soon as R3
stopped advertising the route,R1 installed the route from> R2 with a distance
of 109.> > Is this an expected behavior?Am I missing anything here?> > Thanks>
With regards> Suryakant> > >
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2008 - 06:59:17 ART