From: Ramy Sisy (ramysisy@ipknowledgenet.com)
Date: Tue May 13 2008 - 08:24:00 ART
I recommend you to ask the Proctor too for which value you should use, the
decimal or hexadecimal.
-----------------------------------------------
Thanks,
Ramy Sisy
CCIE#17321 (Security), CCSI#30417
http://www.linkedin.com/in/RAMYSISY
CCIE Security Content Manager/ Technical Instructor
http://www.CCBOOTCAMP.com
-----------------------------------------------
"Any intelligent fool can make things bigger, more complex, and more
violent. It takes a touch of genius - and a lot of courage - to move in the
opposite direction" Albert Einstein
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Dan
C
Sent: Monday, May 12, 2008 5:21 AM
To: raul raul
Cc: ccielab@groupstudy.com
Subject: Re: IPV6 addressing on previous debut
Hi Raul,
Just as additional note ipv4 .10 it is not the same as ipv6 .10 you may need
to convert from decimal dotted to hexadecimal values....
Cheers,
Dan
On Mon, May 12, 2008 at 1:37 PM, raul raul <juvenn@hotmail.com> wrote:
> http://www.groupstudy.com/archives/ccielab/200801/msg01140.html
> Based on previous Debut :
>
> > if on the IPv6 section, they ask you to enable eui-64 and they give you>
> subnet let's say 2001:aaa:111::0/64 but they tell you, you should use
IPv4>
> address's 3rd octet in the network of IPV6.>example R1: x.x.10.1
> So what does this mean :
>
> should it be 2001:aaa:bbb:10::/64 64-eui
>
> or
>
>
> pls help
> _________________________________________________________________
> Easily edit your photos like a pro with Photo Gallery.
> http://get.live.com/photogallery/overview
>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2008 - 06:59:16 ART