From: Anthony Faria (tfaria72@gmail.com)
Date: Mon May 12 2008 - 16:36:41 ART
Just a note about memory. If you use vista it will eat almost a gig with
fedora it ate almost 400mb. Just some info.
Anthony
On Mon, May 12, 2008 at 12:10 PM, CCIE CCIE <good_ccie@yahoo.ca> wrote:
> I can't find this ios c7200-p-mz.120-32.S6 on cisco
>
> Cisco Nuts <cisconuts@hotmail.com> wrote: Hi All:
>
> Is it better to buy a laptop with dual-core and 4 GB of memory
>
> or one with a quad-core(if one exits) and 2 GB of memory?
>
> It seems that cpu is more important than memory (based on the discussion)
> but
> any input is appreciate.
>
> Thx.
>
> > From: joe@affirmedsystems.com
> > To: roman@iementor.com; deeps.ccie@gmail.com; ccielab@groupstudy.com
> > Subject: RE: Dynamips for SP
> > Date: Sun, 11 May 2008 20:58:59 -0400
> >
> > Thank you young Master Jedi.
> >
> >
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> > Roman Rodichev
> > Sent: Sunday, May 11, 2008 8:26 PM
> > To: 'Deepak Ahuja'; ccielab@groupstudy.com
> > Subject: RE: Dynamips for SP
> >
> > The secret sauce is c7200-p-mz.120-32.S6 (yes S6 only) and idle pc value
> > 0x6065bddc
> >
> > Try them and you'll be very surprised
> >
> >
> >
> >
> > Roman Rodichev
> > 5xCCIE #7927 (R&S, Security, Voice, Storage, Service Provider)
> > Instructor, Content Developer. ieMentor Corporation
> > http://www.iementor.com
> > Y!M: roman7927
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> > Deepak Ahuja
> > Sent: Sunday, May 11, 2008 3:38 PM
> > To: ccielab@groupstudy.com
> > Subject: Dynamips for SP
> >
> > Hey Friends
> >
> > I need help with Dynamips with SP
> >
> > My system info
> >
> > Core2 duo - 2.2 GHZ | 2mb L2| 800 Mhz
> > 4gb DDR2 - 800 Mhz
> > Intel 965 Motherboard
> > Win XP
> >
> > I am running 4 Instances of dynamips for IE lab Topology , Optimized
> Idle
> pc
> >
> >
> >
> > The issue I am facing is after 8 router with All protocols, MPLS TE
> > configured , CPU utilization is 100 % , I am able to use the LAB but I
> do
> > see the protocols showing strange behavior.
> >
> > Please provide your valuable Inputs, All help is greatly appreciated
> >
> >
> > Before writing this mail , I did check the archive on Dynamips - Saw a
> lot
> > of suggestions for going with Linux 64 BIT but I cant really run linux
> >
> >
> > Regards
> >
> > Deepak Ahuja
> > CCIE#19545 R&S
> >
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> >
> >
>
> _________________________________________________________________
> With Windows Live for mobile, your contacts travel with you.
>
> http://www.windowslive.com/mobile/overview.html?ocid=TXT_TAGLM_WL_Refresh_mob
> ile_052008<http://www.windowslive.com/mobile/overview.html?ocid=TXT_TAGLM_WL_Refresh_mobile_052008>
>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
> ---------------------------------
> Be smarter than spam. See how smart SpamGuard is at giving junk email the
> boot with the All-new Yahoo! Mail
>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2008 - 06:59:16 ART