From: Peter Kingston (kingstonp.ccie@gmail.com)
Date: Wed May 07 2008 - 20:31:26 ART
Thanks Rich,
I guess I asked the question wrong, I probably should have used a multicast
address for the example.
Thanks for info.
Regards
Peter
On Wed, May 7, 2008 at 11:28 PM, Rich Collins <nilsi2002@gmail.com> wrote:
> Hello Peter,
>
> Your first answer is more correct than the second but you have to set the
> access list to the multicast group.
>
> For example:
>
>
> ip access-list standard 10
> permit 225.5.5.5
>
>
> -Rich
>
>
> On 5/6/08, Peter Kingston <kingstonp.ccie@gmail.com> wrote:
>
> > Hey All,
> >
> > I would be interested to see if this correct:
> >
> > I want to limit the number of IGMP reports to 200 on an interface except
> > for
> > the ip address 10.0.0.1
> >
> > would the configuration look like this?
> >
> > interface fa0/0
> > ip igmp limit 200 except 10
> >
> > ip access-list standard 10
> > permit 10.0.0.1
> >
> > Or like this?
> >
> >
> > ip access-list standard 10
> > deny 10.0.0.1
> > permit any
> >
> > I cant seem to find a definition of the access-list to be used in the
> > above
> > situation/
> >
> > --
> > Regards,
> >
> > Peter Kingston
> > Studying my CCIE
> >
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> >
> >
> >
>
-- Regards,Peter Kingston Studying my CCIE
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2008 - 06:59:16 ART