From: WorkerBee (ciscobee@gmail.com)
Date: Fri May 02 2008 - 23:58:07 ART
I am running the latest image and yet it does not support this command...
BR1#show power inline
^
% Invalid input detected at '^' marker.
BR1#show version
Cisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9-M), Version
12.4(15)T5, RELEASE SOFTWARE (fc4)
On Sat, May 3, 2008 at 10:54 AM, WorkerBee <ciscobee@gmail.com> wrote:
> Despite plugging in the Inline Power Supply unit and attached the
> power cable to the motherboard,
> I still cannot power up my IP Phone. The port works for normal Data connection.
>
> Is there a command to enable PoE for HWIC?
>
> NAME: "2811 chassis", DESCR: "2811 chassis"
> PID: CISCO2811 , VID: V02 , SN:
>
> NAME: "4 Port FE Switch on Slot 0 SubSlot 0", DESCR: "4 Port FE Switch"
> PID: HWIC-4ESW , VID: VN/A, SN:
>
> NAME: "WIC/VIC/HWIC 0 Power Daughter Card", DESCR: "4-Port HWIC-ESW
> Power Daughter Card"
> PID: ILPM-4 , VID: VN/A, SN:
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2008 - 06:59:15 ART