From: Hong Chan (howard.chan34@gmail.com)
Date: Tue Apr 29 2008 - 06:31:40 ART
Dear Parashare,
apply vlan-base on physical interface
http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_44_se/configuration/guide/swqos.html#wp1703760
then apply policy-map on SVI interface
http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_44_se/configuration/guide/swqos.html#wp1703903
eg.,
policy-map VLAN_QOS
class class-default
set precedence 7
interface fa0/10
switchport mode access
switchport access vlan 100
mls qos vlan-based
int vlan 100
service-policy input VLAN_QOS
Correct me if I am wrong, thanks!
Regards,
Howard
2008/4/29 Kiran Parashare <kiran.ccie@gmail.com>:
> Hello GS,
>
> Plz let me know what is the alternate command for match vlan X for 3560
> switch.
>
> As i am getting error while giving same command on 3560 as "Match input
> interface is not supported for this interface".
> It works fine on 3550.
>
> Tkx in Advance.
> Kiran
>
>
> Pass the CCIE in six weeks, Guaranteed!
> http://www.certscience.com/CCIE
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Pass the CCIE in six weeks, Guaranteed!
http://www.certscience.com/CCIE
This archive was generated by hypermail 2.1.4 : Thu May 01 2008 - 08:25:52 ART