From: Ahsan Mohiuddin (ahsan.mohiuddin@gmail.com)
Date: Fri Apr 25 2008 - 01:39:13 ART
Hello Group,
I have two FR spokes R2 and R4 connected out R5 (hub)'s multipoint sub-if
s1/0.245. The network is running PIM sparse-dense. R2 is a client for group
228.22.22.22. There is no RP for it, hence its a dense-mode group. All PIM
routers receive ping replies from the 228.22.22.22 client (R2), except the
other FR spoke R4. I have already checked for RPF failure but can't see any.
On R5, I can see interface s1/0.245 as being in the (S,G) entry's Incoming
interface list but not in the Outgoing list. I have already added ip pim
nbma-mode under this sub-if, but R4 is unable to ping the group. ANy
comments are appreciated. P.S. nothing but physical interfaces is allowed on
both R4 & R2 (FR spokes).
thanks in adv for your inputs
Pass the CCIE in six weeks, Guaranteed!
http://www.certscience.com/CCIE
This archive was generated by hypermail 2.1.4 : Thu May 01 2008 - 08:25:52 ART