From: Cisco Godfather (cisco_godfather@hotmail.com)
Date: Mon Apr 21 2008 - 00:26:59 ART
Make sure you have trunk between your switches, by default Switches on Dynamips are not trunked.
You need to create your trunk first and then set you VTP domain.
HTH
> Date: Mon, 21 Apr 2008 00:21:39 +0300> From: ananth.sarma@gmail.com> To: kiran.ccie@gmail.com> Subject: Re: Trunk on Dynamips> CC: ccielab@groupstudy.com> > Hi Kiran,> > As per your write-up (Shown below in yellow. Hope it was not a typo error!),> you configured two different domains A and B. How do you expect client in> Domain B would learn VLANs created on a server from Domain A?> > Both server and the client shall be in the same VTP domain to propagate the> VLAN information.> > May be, you meant that both are in the same Domain either A or B and one> being a server and the other a client.> > If that is the case, may be, others' comments are valid.> > Correct me if I am wrong.> > Let's ask the experts.> > Regards,> > Ananth> > > > On Sun, Apr 20, 2008 at 7:31 PM, Kiran Parashare <kiran.ccie@gmail.com>> wrote:> > > Hello GS,> >> > Hello,> > I have created the VTP domain A as server and domain B as client but> > whatever vlan created on domain A not passing to client domai!
n B.> > What could be wrong as i using IEWB for ccie.> > I am using dynagen 0.11.0 for XP. I have created the new vlan.dat file but> > server not passing the vlan info to client.> > Please suggest any changes to be made.> > Appreciate your timely help.> > Regards,> > Kiran> >> >> > Pass the CCIE in six weeks, Guaranteed!> > http://www.certscience.com/CCIE> > _______________________________________________________________________> > Subscription information may be found at:> > http://www.groupstudy.com/list/CCIELab.html> > > Pass the CCIE in six weeks, Guaranteed!> http://www.certscience.com/CCIE> _______________________________________________________________________> Subscription information may be found at: > http://www.groupstudy.com/list/CCIELab.html> > >
This archive was generated by hypermail 2.1.4 : Thu May 01 2008 - 08:25:51 ART