From: Peter (engpeter@gmail.com)
Date: Sat Apr 19 2008 - 13:09:25 ART
Dear GS,
Did anyone face any problem with ICMPv6 ND on dynamips?
R3 and R1 are connected on the same switch. If I ping, the neighbors appear,
but without pinging, I can see the router receiving the NA but entries don't
appear in the IPv6 neighbor table.
This isn't normal, is it? as soon as the RA is sent from each router, the
other router should recognize it? right?
R3#sh ipv6 nei
IPv6 Address Age Link-layer Addr State
Interface
FE80::CE00:17FF:FEE5:0 11 cc00.17e5.0000 STALE Et0/0
R3#
R3#
R3#
*Mar 1 00:53:07.451: ICMPv6-ND: Sending RA to FF02::1 on Ethernet0/0
*Mar 1 00:53:07.455: ICMPv6-ND: MTU = 1500
R3#
TermServ#1
[Resuming connection 1 to r1 ... ]
*Mar 1 00:55:18.051: ICMPv6: Received ICMPv6 packet from
FE80::CE02:17FF:FEE5:0, type 134
R1#
R1#sh ipv6 nei
R1#sh ipv6 neighbors
R1#
Cheers,
Peter
Pass the CCIE in six weeks, Guaranteed!
http://www.certscience.com/CCIE
This archive was generated by hypermail 2.1.4 : Thu May 01 2008 - 08:25:51 ART