From: Rik Guyler (rik@guyler.net)
Date: Tue Apr 15 2008 - 13:30:47 ART
We've hashed this out before but the general consensus is that it should be
alright to add a static mroute as that is not the same as a static route.
As always, demonstrate that you know the technology to the proctor and then
ask if you can add a static mroute to compensate for RPF issues.
Rik
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
cciestudy
Sent: Tuesday, April 15, 2008 12:23 PM
To: ccielab@groupstudy.com
Subject: RE: Multicast Routing Table Woes
The biggest hang up with multicast is how to handle RFP issues? When do I
"adjust" the unicast routing to make the path work, when do I use static
mroute (probably not an option on the test)? My experience with the
training labs is you either have the unicast routing wrong, or they allow
static mroute. On the real test I would not use a static mroute unless it
specifically says so. Any words of wisdom on this?
Pass the CCIE in six weeks, Guaranteed!
http://www.certscience.com/CCIE
This archive was generated by hypermail 2.1.4 : Thu May 01 2008 - 08:25:51 ART