From: Paul Cosgrove (paul.cosgrove@heanet.ie)
Date: Wed Apr 09 2008 - 15:52:48 ART
Hi Sadiq,
Sorry, I'm a little slow today (as you can tell)!
Paul.
Paul Cosgrove wrote:
> Hi Sadiq,
>
> You can see what I mean in the output below. I think 'exit' works in
> the same way as any other command:-
>
> Switch1#sh vtp status
> VTP Version : running VTP1 (VTP2 capable)
> Configuration Revision : 0
> Maximum VLANs supported locally : 1005
> Number of existing VLANs : 5
> VTP Operating Mode : Server
> VTP Domain Name :
> VTP Pruning Mode : Disabled
> VTP V2 Mode : Disabled
> VTP Traps Generation : Disabled
> MD5 digest : 0x57 0xCD 0x40 0x65 0x63 0x59 0x47 0xBD
> Configuration last modified by 0.0.0.0 at 0-0-00 00:00:00
> Local updater ID is 0.0.0.0 (no valid interface found)
> Switch1#sh vlan brief
>
> VLAN Name Status Ports
> ---- -------------------------------- ---------
> -------------------------------
> 1 default active Fa0/1, Fa0/3, Fa0/5, Fa0/6
> Fa0/7, Fa0/11, Fa0/12,
> Fa0/13
> Fa0/15, Fa0/16, Fa0/17,
> Fa0/18
> Fa0/20, Fa0/21, Fa0/22,
> Fa0/23
> Fa0/24, Gi0/1, Gi0/2
> 1002 fddi-default act/unsup
> 1003 token-ring-default act/unsup
> 1004 fddinet-default act/unsup
> 1005 trnet-default act/unsup
> Switch1#conf t
> Enter configuration commands, one per line. End with CNTL/Z.
> Switch1(config)#vlan 10
> Switch1(config-vlan)#do sh vtp status
> VTP Version : running VTP1 (VTP2 capable)
> Configuration Revision : 0
> Maximum VLANs supported locally : 1005
> Number of existing VLANs : 5
> VTP Operating Mode : Server
> VTP Domain Name :
> VTP Pruning Mode : Disabled
> VTP V2 Mode : Disabled
> VTP Traps Generation : Disabled
> MD5 digest : 0x57 0xCD 0x40 0x65 0x63 0x59 0x47 0xBD
> Configuration last modified by 0.0.0.0 at 0-0-00 00:00:00
> Local updater ID is 0.0.0.0 (no valid interface found)
> Switch1(config-vlan)#do sh vlan brief
>
> VLAN Name Status Ports
> ---- -------------------------------- ---------
> -------------------------------
> 1 default active Fa0/1, Fa0/3, Fa0/5, Fa0/6
> Fa0/7, Fa0/11, Fa0/12,
> Fa0/13
> Fa0/15, Fa0/16, Fa0/17,
> Fa0/18
> Fa0/20, Fa0/21, Fa0/22,
> Fa0/23
> Fa0/24, Gi0/1, Gi0/2
> 1002 fddi-default act/unsup
> 1003 token-ring-default act/unsup
> 1004 fddinet-default act/unsup
> 1005 trnet-default act/unsup
> Switch1(config-vlan)#vlan 20
> Switch1(config-vlan)#do sh vtp status
> VTP Version : running VTP1 (VTP2 capable)
> Configuration Revision : 1
> Maximum VLANs supported locally : 1005
> Number of existing VLANs : 6
> VTP Operating Mode : Server
> VTP Domain Name :
> VTP Pruning Mode : Disabled
> VTP V2 Mode : Disabled
> VTP Traps Generation : Disabled
> MD5 digest : 0xB1 0xBE 0x72 0x49 0x96 0x6D 0x99 0xA4
> Configuration last modified by 0.0.0.0 at 3-1-93 00:01:47
> Local updater ID is 0.0.0.0 (no valid interface found)
> Switch1(config-vlan)#do sh vlan brief
>
> VLAN Name Status Ports
> ---- -------------------------------- ---------
> -------------------------------
> 1 default active Fa0/1, Fa0/3, Fa0/5, Fa0/6
> Fa0/7, Fa0/11, Fa0/12,
> Fa0/13
> Fa0/15, Fa0/16, Fa0/17,
> Fa0/18
> Fa0/20, Fa0/21, Fa0/22,
> Fa0/23
> Fa0/24, Gi0/1, Gi0/2
> 10 VLAN0010 active Fa0/10, Fa0/14, Fa0/19
> 1002 fddi-default act/unsup
> 1003 token-ring-default act/unsup
> 1004 fddinet-default act/unsup
> 1005 trnet-default act/unsup
> Switch1(config-vlan)#vlan 30
> Switch1(config-vlan)#do sh vtp status
> VTP Version : running VTP1 (VTP2 capable)
> Configuration Revision : 2
> Maximum VLANs supported locally : 1005
> Number of existing VLANs : 7
> VTP Operating Mode : Server
> VTP Domain Name :
> VTP Pruning Mode : Disabled
> VTP V2 Mode : Disabled
> VTP Traps Generation : Disabled
> MD5 digest : 0xB2 0x7C 0xEB 0x44 0xB9 0x61 0x2A 0x3F
> Configuration last modified by 0.0.0.0 at 3-1-93 00:02:20
> Local updater ID is 0.0.0.0 (no valid interface found)
> Switch1(config-vlan)#do sh vlan brief
>
> VLAN Name Status Ports
> ---- -------------------------------- ---------
> -------------------------------
> 1 default active Fa0/1, Fa0/3, Fa0/5, Fa0/6
> Fa0/7, Fa0/11, Fa0/12,
> Fa0/13
> Fa0/15, Fa0/16, Fa0/17,
> Fa0/18
> Fa0/20, Fa0/21, Fa0/22,
> Fa0/23
> Fa0/24, Gi0/1, Gi0/2
> 10 VLAN0010 active Fa0/10, Fa0/14, Fa0/19
> 20 VLAN0020 active Fa0/4
> 1002 fddi-default act/unsup
> 1003 token-ring-default act/unsup
> 1004 fddinet-default act/unsup
> 1005 trnet-default act/unsup
> Switch1(config-vlan)#vtp mode client
> Setting device to VTP CLIENT mode.
> Switch1(config)#do sh vtp status
> VTP Version : running VTP1 (VTP2 capable)
> Configuration Revision : 3
> Maximum VLANs supported locally : 1005
> Number of existing VLANs : 8
> VTP Operating Mode : Client
> VTP Domain Name :
> VTP Pruning Mode : Disabled
> VTP V2 Mode : Disabled
> VTP Traps Generation : Disabled
> MD5 digest : 0x39 0x91 0x7F 0xE4 0xF4 0xD2 0xD1 0xA1
> Configuration last modified by 0.0.0.0 at 3-1-93 00:02:34
> Switch1(config)#do sh vlan brief
>
> VLAN Name Status Ports
> ---- -------------------------------- ---------
> -------------------------------
> 1 default active Fa0/1, Fa0/3, Fa0/5, Fa0/6
> Fa0/7, Fa0/11, Fa0/12,
> Fa0/13
> Fa0/15, Fa0/16, Fa0/17,
> Fa0/18
> Fa0/20, Fa0/21, Fa0/22,
> Fa0/23
> Fa0/24, Gi0/1, Gi0/2
> 10 VLAN0010 active Fa0/10, Fa0/14, Fa0/19
> 20 VLAN0020 active Fa0/4
> 30 VLAN0030 active
> 1002 fddi-default act/unsup
> 1003 token-ring-default act/unsup
> 1004 fddinet-default act/unsup
> 1005 trnet-default act/unsup
> Switch1(config)#
>
>
>
> Sadiq Yakasai wrote:
>> Hi Paul,
>>
>> Actually, the VLAN is created when you exit the "VLAN-config" mode,
>> rather than the next command. This is because you have the option of
>> setting parameters to the VLAN you create and as such, only when you
>> exit from the VLAN-config mode that the VLAN is created and all the
>> settings applied. Try this and see below:
>>
>> 3KI6R61-3560(config)#vlan 112
>> 3KI6R61-3560(config-vlan)#?
>> VLAN configuration commands:
>> are Maximum number of All Route Explorer hops for this
>> VLAN (or
>> zero if none specified)
>> backupcrf Backup CRF mode of the VLAN
>> bridge Bridging characteristics of the VLAN
>> exit Apply changes, bump revision number, and exit mode
>> media Media type of the VLAN
>> mtu VLAN Maximum Transmission Unit
>> name Ascii name of the VLAN
>> no Negate a command or set its defaults
>> parent ID number of the Parent VLAN of FDDI or Token Ring
>> type VLANs
>> private-vlan Configure a private VLAN
>> remote-span Configure as Remote SPAN VLAN
>> ring Ring number of FDDI or Token Ring type VLANs
>> said IEEE 802.10 SAID
>> shutdown Shutdown VLAN switching
>> state Operational state of the VLAN
>> ste Maximum number of Spanning Tree Explorer hops for this
>> VLAN (or
>> zero if none specified)
>> stp Spanning tree characteristics of the VLAN
>> tb-vlan1 ID number of the first translational VLAN for this
>> VLAN (or
>> zero if none)
>> tb-vlan2 ID number of the second translational VLAN for this
>> VLAN (or
>> zero if none)
>>
>> 3KI6R61-3560(config-vlan)#exit
>> 3KI6R61-3560(config)#do show vlan | i 112
>> 112 VLAN0112 active
>> 112 enet 100112 1500 - - - - - 0 0
>> 3KI6R61-3560(config)#
>>
>> HTH
>>
>> Sadiq
>>
>>
>> Pass the CCIE in six weeks, Guaranteed!
>> http://www.certscience.com/CCIE
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>
>
-- HEAnet Limited Ireland's Education & Research Network 5 George's Dock, IFSC, Dublin 1, Ireland Tel: +353.1.6609040 Web: http://www.heanet.ie Company registered in Ireland: 275301Please consider the environment before printing this e-mail.
Pass the CCIE in six weeks, Guaranteed! http://www.certscience.com/CCIE
This archive was generated by hypermail 2.1.4 : Thu May 01 2008 - 08:25:50 ART