From: Avner Izhar (aizhar@ccbootcamp.com)
Date: Wed Apr 09 2008 - 03:25:44 ART
How many of those 2650XMs do you have?
You usually need 4 to set up a voice lab topology.
Also a switch is required, prefer a PoE 3550.
Let us know.
-------------------------------------------
thanks,
Avner Izhar
CCIE#15999 (Voice), CCVP, CCSI# 31623
Technical Training Manager
CCBOOTCAMP - A Cisco Sponsored Organization (SO)
Email: aizhar@ccbootcamp.com
Toll Free: 877-654-2243
Direct: +1-702-968-5100 = Outside the USA
FAX: +1-702-446-8012
-----Original Message-----
From: Fermo, Jason [mailto:Jason.Fermo@anacomp.com]
Sent: Tuesday, April 08, 2008 11:25 AM
To: Avner Izhar; davidytk; ccielab@groupstudy.com
Subject: RE: CCIE Voice Equipment
Hi.
I just passed the security lab and I am planning to re-use the 2650XMs that I have for voice lab. Aside from the voice servers, ATA, VG248 and 6500, can I do the voice workbooks using 2650XMs with the part numbers below ?
2 x NM-HDV2-1T1/E1 = One-port T1/E1 IP Communications High-Density Digital voice or Fax Network Module, with one onboard T1/E1 controller and one VIC/VWIC slot
1 x VIC2-2FXS - 2-port FXS voice/fax interface card
1 x VIC2-2FXO - 2-port FXO voice/fax interface card [universal card for all countries]. Also supports analog Centralized Automated Message Accounting (CAMA) on any port.
2 x PVDM2-8 - 8-channel packet fax/voice DSP module, contains one Texas Instruments (TI) C5510 DSP
5 x 7960 IP phones
Thanks.
Jason
CCIE#20127 (Security)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Avner Izhar
Sent: Monday, April 07, 2008 9:10 PM
To: davidytk; ccielab@groupstudy.com
Subject: RE: CCIE Voice Equipment
Sounds like a great start to me!
You might want to consider some analog interfaces, such as fxs/fxo and an ATA, those are in the blue print and should not cost too much.
Good luck!
-------------------------------------------
thanks,
Avner Izhar
CCIE#15999 (Voice), CCVP, CCSI# 31623
Technical Training Manager
CCBOOTCAMP - A Cisco Sponsored Organization (SO)
Email: aizhar@ccbootcamp.com
Toll Free: 877-654-2243
Direct: +1-702-968-5100 = Outside the USA
FAX: +1-702-446-8012
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of davidytk
Sent: Monday, April 07, 2008 4:23 AM
To: ccielab@groupstudy.com
Subject: CCIE Voice Equipment
Hi All
For the CCIE Voice Lab, if I will buy the following equipments. Is it okay for doing home lab only (except the lab for 6k).
TWO (3640 + NM-2E2W+ WIC-1T+ NM-HDV-1T1-12+ VWIC-MFT-T1) ONE (3640 + NM-2E2W+ WIC-1Tx 2 +NM-HDV-1T1-12 + VWIC-MFT-2T1 ) CAT3550 with inline power.
CallManager Server/Unity/CRS (3 Servers)
4-5 7960 IP Phones.
Also does the simulator(Dynamips) can do the above home lab (except 6k).
Please advise
Thanks
Best regards
David
This archive was generated by hypermail 2.1.4 : Thu May 01 2008 - 08:25:50 ART