From: darth router (darklordrouter@gmail.com)
Date: Tue Apr 08 2008 - 21:57:41 ART
Yikes,
Attacks on dynamps, it's almost like an attack on change itself.
www.hacki.at is where you should go for help.
it's quite easy to use, and will save you countless hours vs using a real
rack, and your pocketbook.
On Tue, Apr 8, 2008 at 10:32 AM, <kmoorman@gmail.com> wrote:
> you need to edit your dynamips start file and add
>
> @echo off
> rem Launch a local copy of dynamips
> start /belownormal /min "Dynamips" "dynamips-wxp.exe" -H 7200 < this is
> the
> first instance
> start /belownormal /min "Dynamips" "dynamips-wxp.exe" -H 7201 < this is
> the
> second instance
>
> then make sure your net file config is correct look for these lines
>
> autostart = False
> [localhost:7200] < this is specifies the first instance
>
> autostart = False
> [localhost:7201] < this is the specifies the second instance
>
> under each of these markers should be your routers, images, connection
> between
> routers.
>
> i would also suggest starting each router model individually to find the
> best
> idlepc value for the image.
>
> ***************************************************************************************************
>
> side note: i'm a big fan of dynamips every router config can be done
> within it
> but the switching side is not there yet so you have to find other
> ways/means of
> doing/learning some of the switching stuff. As renting rack time can get
> expensive from the constant waste of the unused hours as a single means of
> study and rack ownership has its good points and bad points. i have owned
> a
> rack but prefer dynamips as it shuts down when i want it to with no extra
> effort that the clicks of mouse... my 2 cents
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu May 01 2008 - 08:25:50 ART