From: theKonqueror (thekonqueror@gmail.com)
Date: Tue Apr 08 2008 - 06:14:31 ART
Mroute config on R4:
R4#sh run | in mroute
ip mroute 155.1.0.5 255.255.255.255 Tunnel0
R4#
2008/4/8 theKonqueror <thekonqueror@gmail.com>:
> Here it is:
>
> R4:
>
> R4#sh ip pim neighbor
> PIM Neighbor Table
> Neighbor Interface Uptime/Expires Ver DR
> Address
> Prio/Mode
> 155.1.0.5 Tunnel0 00:01:12/00:01:31 v2 1 / S
> R4#
>
> R4#sh ip mroute | b Int
> Interface state: Interface, Next-Hop or VCD, State/Mode
>
> (*, 224.2.2.2), 00:35:58/stopped, RP 0.0.0.0, flags: DCL
> Incoming interface: Null, RPF nbr 0.0.0.0
> Outgoing interface list:
> Tunnel0, Forward/Dense, 00:01:47/00:00:00
> Ethernet0/0, Forward/Dense, 00:00:47/00:00:00
>
> (155.1.0.5, 224.2.2.2), 00:00:26/00:02:33, flags: L
> Incoming interface: Serial1/0, RPF nbr 0.0.0.0
> Outgoing interface list:
> Tunnel0, Forward/Dense, 00:00:26/00:00:00
> Ethernet0/0, Forward/Dense, 00:00:26/00:00:00
>
> (*, 224.0.1.40), 00:36:48/00:02:14, RP 0.0.0.0, flags: DCL
> Incoming interface: Null, RPF nbr 0.0.0.0
> Outgoing interface list:
> Tunnel0, Forward/Dense, 00:01:47/00:00:00
> Serial1/0, Forward/Dense, 00:00:52/00:00:00
> Ethernet0/0, Forward/Dense, 00:00:45/00:00:00
>
> R4#sh ip mroute count
> IP Multicast Statistics
> 3 routes using 2334 bytes of memory
> 2 groups, 0.50 average sources per group
> Forwarding Counts: Pkt Count/Pkts per second/Avg Pkt Size/Kilobits per
> second
> Other counts: Total/RPF failed/Other drops(OIF-null, rate-limit etc)
>
> Group: 224.2.2.2, Source count: 1, Packets forwarded: 0, Packets received:
> 30
> Source: 155.1.0.5/32, Forwarding: 0/0/0/0, Other: 30/30/0
>
> Group: 224.0.1.40, Source count: 0, Packets forwarded: 0, Packets
> received: 0
> R4#
>
> R4#debug ip mpacket detail
> IP multicast packets debugging is on (detailed)
> R4#
> *Mar 1 00:43:10.019: IP(0): MAC sa=*Tunnel* (Tunnel0)
> *Mar 1 00:43:10.023: IP(0): IP tos=0x0, len=100, id=618, ttl=253, prot=1
> *Mar 1 00:43:10.023: IP(0): s=155.1.0.5 (Tunnel0) d=224.2.2.2 id=618,
> ttl=253, prot=1, len=100(100), not RPF interface
> R4#
> *Mar 1 00:43:12.055: IP(0): MAC sa=*Tunnel* (Tunnel0)
> *Mar 1 00:43:12.059: IP(0): IP tos=0x0, len=100, id=619, ttl=253, prot=1
> *Mar 1 00:43:12.059: IP(0): s=155.1.0.5 (Tunnel0) d=224.2.2.2 id=619,
> ttl=253, prot=1, len=100(100), not RPF interface
> R4#
>
> ---------------------------------------------
>
> R5
>
> R5#sh ip pim neighbor
> PIM Neighbor Table
> Neighbor Interface Uptime/Expires Ver DR
> Address
> Prio/Mode
> 155.1.0.4 Tunnel0 00:02:53/00:01:19 v2 1 / S
> R5#
>
> R5#sh ip mroute | b Int
> Interface state: Interface, Next-Hop or VCD, State/Mode
>
> (*, 224.0.1.40), 00:36:51/00:02:36, RP 0.0.0.0, flags: DCL
> Incoming interface: Null, RPF nbr 0.0.0.0
> Outgoing interface list:
> Tunnel0, Forward/Dense, 00:03:11/00:00:00
> Serial1/0, Forward/Dense, 00:36:51/00:00:00
>
> R5#
>
>
> R5#sh ip mroute count
> IP Multicast Statistics
> 1 routes using 772 bytes of memory
> 1 groups, 0.00 average sources per group
> Forwarding Counts: Pkt Count/Pkts per second/Avg Pkt Size/Kilobits per
> second
> Other counts: Total/RPF failed/Other drops(OIF-null, rate-limit etc)
>
> Group: 224.0.1.40, Source count: 0, Packets forwarded: 0, Packets
> received: 0
> R5#
>
> ---------------------------------------------
>
> Thanks,
> Rahul
>
>
> On Tue, Apr 8, 2008 at 2:34 PM, Sadiq Yakasai <sadiqtanko@gmail.com>
> wrote:
>
> > HI Rahul,
> >
> > Please can you provide:
> >
> > show ip mroute count
> > show ip pim nei
> > show ip mroute
> >
> > From both sides?
> >
> > Sadiq
> >
>
>
>
> --
> Bugs can neither be created nor be removed from software by a developer.
> They can only be converted from one form to another. The total number of
> bugs in the software always remain constant.
>
> .}l}..}l}.
>
-- Bugs can neither be created nor be removed from software by a developer. They can only be converted from one form to another. The total number of bugs in the software always remain constant..}l}..}l}.
This archive was generated by hypermail 2.1.4 : Thu May 01 2008 - 08:25:50 ART