Re: Dymanmips

From: theKonqueror (thekonqueror@gmail.com)
Date: Sun Apr 06 2008 - 10:57:23 ART

• Next message: Ramy Sisy: "RE: Asking the Proctor"
• Previous message: Ferreira, Marina: "RE: Dymanmips"
• Maybe in reply to: Kiran Parashare: "Dymanmips"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

You can just add "no switchport" on etherchannel and assign IP address. If
router is not taking "no switchport" command, you probably need to upgrade
IOS to 12.4.

Thanks,
Rahul

On Sun, Apr 6, 2008 at 7:20 PM, Ferreira, Marina <marina.ferreira@eds.com>
wrote:

> also, before you start creating vlans in vlan database, in conf mode
> issue: vtp file nvram:vlan.dat
>
> now, concerning L3 etherchannels, those I am unable to work. Appreciate
> any inputs on that too.
>
> ________________________________
>
> From: nobody@groupstudy.com on behalf of theKonqueror
> Sent: Sun 6/4/2008 07:01
> To: Kiran Parashare
> Cc: Cisco certification
> Subject: Re: Dymanmips
>
>
>
> You can configure Vlans, VTP, L2 and L3 etherchannels, L3 switcihng under
> dynamips. Dot1QinQ tunnels are not supported in dynamips though.
>
> To configure Vlans and VTP, you need to go to vlan database.
>
> Thanks,
> Rahul
>
> On Sun, Apr 6, 2008 at 12:33 PM, Kiran Parashare <kiran.ccie@gmail.com>
> wrote:
>
> > Hello GS,
> >
> > Sorry!!! as this might be repeated Question...
> >
> > What are the switching things which not works in Dynamips?
> > Vlan,VTP,Private
> > Vlan,EtherChannel etc..
> >
> > If those things not works in Dynamips then how to proceed further for
> IEWB
> > labs ( I am new for IEWB in Dyanmips).
> >
> > Please let me know how to start IEWB in Dynamips..Confused !!!
> >
> > Thanks in Advance...
> >
> > Kind-Regards,
> > Kiran
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
>
>
>
> --
> Bugs can neither be created nor be removed from software by a developer.
> They can only be converted from one form to another. The total number of
> bugs in the software always remain constant.
>
> .}l}..}l}.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>

-- 
Bugs can neither be created nor be removed from software by a developer.
They can only be converted from one form to another. The total number of
bugs in the software always remain constant.
.}l}..}l}.

• Next message: Ramy Sisy: "RE: Asking the Proctor"
• Previous message: Ferreira, Marina: "RE: Dymanmips"
• Maybe in reply to: Kiran Parashare: "Dymanmips"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu May 01 2008 - 08:25:50 ART