From: Peter (engpeter@gmail.com)
Date: Sat Apr 05 2008 - 18:09:46 ART
It happens lot of times to me as well, specially when setting up the lab at
the beginning.
I save configs and reload both, it works.
If anyone has solution for this u're more than welcome!
Cheers,
Peter
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Matt
Bentley
Sent: Saturday, April 05, 2008 22:54
To: Cisco certification
Subject: Very Strange Dynamips Problem
Hi GS:
Wondering if anyone else has had similar issues with dynamips. I have R1
Fa0/0 directly connected to SW1 Fa1/1. Show cdp neighbors verifies this. I
get an encapsulation failed message when I try to ping R1 from SW1. R1 has
a ARP entry for SW1, but SW1 does not have an entry for R1. I have hard
coded the speed and duplex settings to 100MBPS full duplex, still nothing.
What am I doing wrong? Like I say, if anyone else has had similar issues
with dynamips, I would appreciate your help. Thanks very much in advance.
This archive was generated by hypermail 2.1.4 : Thu May 01 2008 - 08:25:50 ART