From: Scott Morris (smorris@ipexpert.com)
Date: Sat Apr 05 2008 - 12:26:04 ART
In order to build your list of IP's, it's a good idea to do something like
"show ip interface brief | exclude una" to get a list of real IPs you have.
After that, you can hold the ALT key down, and use the mouse to JUST
highlight the column of IP addresses. Then right-click and choose Copy.
Then paste your IP's into notepad.
Save a little editing time. :)
But even if you pick up too many IP's, it's no worry. The thing you should
always be able to answer if you have a ping failure is 'why?'. It may be
'cause you aren't supposed to have a route, or an ACL filters traffic or
something. But you should be able to explain all of the failures.
HTH,
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, JNCIE-M
#153, JNCIS-ER, CISSP, et al.
CCSI/JNCI-M/JNCI-ER
VP - Technical Training - IPexpert, Inc.
IPexpert Sr. Technical Instructor
Telephone: +1.810.326.1444
Fax: +1.810.454.0130
http://www.ipexpert.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Z
Linux
Sent: Saturday, April 05, 2008 10:19 AM
To: marc.a.laporte@gmail.com; ccielab@groupstudy.com
Subject: Re: TCL Script
Thanks its a good one.
U advice to add loopback interfaces IP address in the script.
http://blog.internetworkexpert.com/2008/02/22/using-tcl-and-macro-ping-scrip
t
s-for-ccie-lab-reachability-testing/
On Sat, Apr 5, 2008 at 3:44 PM, Kiran Parashare <kiran.ccie@gmail.com>
wrote:
> Hello GS,
>
> Please let me know what is the TCL script and how to use during the LAB..
>
> Also let me know what are the shortest things that needs to do like
> Alias etc.
>
> Appreciate your Reply
>
> Kind-Regards
> Kiran
>
> ______________________________________________________________________
> _ Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- http://deurpost.wordpress.com
This archive was generated by hypermail 2.1.4 : Thu May 01 2008 - 08:25:50 ART