From: Sadiq Yakasai (sadiqtanko@gmail.com)
Date: Thu Apr 03 2008 - 11:42:57 ART
Hi Dwayne,
1. Can you provide a "show vtp status" on 4 switches...that would be
more helpful.
2. I think you are interchanging (mayb mistaking) VTP with
spanning-tree here. Once your VLANs are created and forwarding on the
ports, you should be able to ping. However, you mentioned that you
connected a router on the access port on SW3 which (on the first
diagram) connects directly to SW2 (which means SW2 has to be doing
routing at least). But this is not the case with the second diagram
you have provided. Would this be a diagramo (mistake on the drawing)
or rather a spanning-tree alternate ports (which are not forwarding
and hence the traffic is not going over the expected trunks/port)?
Sadiq
This archive was generated by hypermail 2.1.4 : Thu May 01 2008 - 08:25:49 ART