From: Daniel Valle (danielfrvalle@gmail.com)
Date: Wed Apr 02 2008 - 12:57:44 ART
Hi Gs,
I'd really like a helping hand in here! I don't know how to do what I've
asked in that previous e-mail.
I read the IE blog, but the Parent Policy-map matches on differente things.
What if I just want to match the same exact traffic, but treat them
differently when they come through different ports. ?
Thanks in advance,
Daniel
---------- Forwarded message ----------
From: Daniel Valle <danielfrvalle@gmail.com>
Date: Sat, Mar 29, 2008 at 5:51 PM
Subject: Re: Apply MQC in switchport
To: ccielab@groupstudy.com
GS,
I think this config work for one match. But if we want to make two or more
different matches for two or more different ports, than I don't know how can
that occur
let's say, set DSCP CS3 for f0/13, CS4 for F0/14 and CS5 for f0/15.... All
of them in vlan , let's say 13. how can we do that ? if it is another vlan
passing over the trunk... 14 for example... those matches can't occur. what
configu would solve that ? I Saw the seminar in IE site but it didn't help
me on that... I mean.. It was easy to undersand the VLAN-based traffic...
but it is one single marking for all vlan ..
I'd appreciate your comments here!
Thanks,
Daniel.
On Sat, Mar 29, 2008 at 5:12 AM, <Noor.Yousuf@shell.com> wrote:
> Yes, "class any" could be any class you decide, it could be class-default
> as well
>
> Noor
>
> -----Original Message-----
> From: Mike M [mailto:mike_malan@yahoo.co.uk]
> Sent: vrijdag 28 maart 2008 22:29
> To: Yousuf, Noor S SITI-ITIBTAE; mpurple7@yahoo.com;
> gabriel.nunes@gmail.com
> Cc: ccielab@groupstudy.com
> Subject: RE: Apply MQC in switchport
>
>
> Hi, all
>
> I understand the below config but initially was stuck
> with "class any" statement in the policy-map config.
>
> policy-map prec
> > class any
> > set ip prec 5
> > service-policy interface
>
> I figured "class any" can be "class class-default", as
> there is no class-map called "class-map any".
>
> Is this the only class-map for "class any"??
>
> regards
> Mike
>
> --- Noor.Yousuf@shell.com wrote:
>
> > Try this,
> >
> > int g1/0/24
> > mls qos vlan-based
> >
> > class-map interface
> > match input-interface g1/0/24
> >
> > policy-map interface
> > class interface
> >
> > policy-map prec
> > class any
> > set ip prec 5
> > service-policy interface
> >
> > int vlan 50
> > no ip address
> > service-policy input prec
> >
> > Thanks,
> >
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com
> > [mailto:nobody@groupstudy.com]On Behalf Of
> > Moses Polalysa
> > Sent: woensdag 26 maart 2008 14:44
> > To: Gabriel Nunes
> > Cc: ccielab@groupstudy.com
> > Subject: Re: Apply MQC in switchport
> >
> >
> > Hi,
> >
> > Thanks for the reply. I have tried again but it also
> > not working.
> >
> > SW1(config-if)#exit
> > SW1(config)#int vlan 10
> > SW1(config-if)#service-policy output VLAN
> > Match input interface is not supported for this
> > interface
> > SW1(config-if)#
> >
> > Basically, I want to mark traffic from, let's say,
> > VLAN 50 in Gi1/0/24 with ip precedence 5.
> >
> > Regards,
> >
> > Moses
> >
> >
> >
> > ----- Original Message ----
> > From: Gabriel Nunes <gabriel.nunes@gmail.com>
> > To: Moses Polalysa <mpurple7@yahoo.com>
> > Cc: ccielab@groupstudy.com
> > Sent: Wednesday, March 26, 2008 8:36:29 PM
> > Subject: Re: Apply MQC in switchport
> >
> > the vlan-based command should be applied on layer 2
> > interface and service-policy on SVI interface
> >
> > On Wed, Mar 26, 2008 at 10:26 AM, Moses Polalysa
> > <mpurple7@yahoo.com> wrote:
> > Hi,
> >
> > Thanks for your reply. I have tried but still not
> > work out. :(
> >
> > SW1(config-if)#mls qos vlan-based
> > SW1(config-if)#service-policy out VLAN_A
> > Match input interface is not supported for this
> > interface
> >
> > SW1(config-if)#
> >
> > Regards,
> > Moses
> >
> >
> >
> >
> > ----- Original Message ----
> > From: Gabriel Nunes <gabriel.nunes@gmail.com>
> > To: Sadiq Yakasai <sadiqtanko@gmail.com>
> > Cc: Moses Polalysa <mpurple7@yahoo.com>;
> > ccielab@groupstudy.com
> > Sent: Wednesday, March 26, 2008 7:33:28 PM
> > Subject: Re: Apply MQC in switchport
> >
> > I think you must configure "mls qos vlan-based" on
> > switchport interface and so configure the
> > service-policy on SVI interface.
> >
> > Gabriel
> >
> >
> > On Wed, Mar 26, 2008 at 7:50 AM, Sadiq Yakasai
> > <sadiqtanko@gmail.com> wrote:
> > Hi Moses,
> >
> > Not all platforms support marking traffic in all
> > directions actually.
> > And my guess is you are experiencing this behaviour
> > on the 3560.
> >
> > Try going through the documentation and seeing if
> > egress marking is
> > supported on the 3560. Else, you could change your
> > concept and mark on
> > the ingress anyway.
> >
> > HTH
> >
> > Sadiq
> >
> >
> >
> _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
>
> ____________________________________________________________________________________
> > Be a better friend, newshound, and
> > know-it-all with Yahoo! Mobile. Try it now.
> >
> http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
> >
> >
> >
> >
> _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
>
> ____________________________________________________________________________________
> > Be a better friend, newshound, and
> > know-it-all with Yahoo! Mobile. Try it now.
> >
> http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
> >
> >
> _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
>
>
>
> __________________________________________________________
> Sent from Yahoo! Mail.
> A Smarter Inbox http://uk.docs.yahoo.com/nowyoucan.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu May 01 2008 - 08:25:49 ART