From: Amir.Tahir/Wateen/Lahore (Amir.Tahir@wateen.com)
Date: Fri Mar 28 2008 - 01:32:18 ART
Hi there,
I am sure by now you have solved the issue but address overlaps notice
pop up when you have configured wrong subnet mask. Check other sub
interface mask and do the math.
If both interfaces are in one subnet mask, you will have this issue
Regards
__________________
Amir Tahir
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
ccie girl
Sent: Monday, March 24, 2008 7:14 PM
To: ccielab@groupstudy.com
Subject: Strange stuff...
Hi there
Can anyone please explain this strange behaviour?
If I try to put the ip address in one line at a time it spits it out:
R2#c
Enter configuration commands, one per line. End with CNTL/Z.
R2(config)#int s0/0.1 poi
R2(config)#int s0/0.1 point-to-point
R2(config-subif)#ip add
R2(config-subif)#ip address 172.16.25.0 255.255.255.254
% 172.16.25.0 overlaps with Serial0/0.56
R2(config-subif)#^Z
R2#
But if I cut and paste it in with the dlci command it's OK!!!
R2#c
Enter configuration commands, one per line. End with CNTL/Z.
R2(config)#
R2(config)#!
R2(config)#interface Serial0/0.1 point-to-point
R2(config-subif)# ip address 172.16.25.0 255.255.255.254
R2(config-subif)# frame-relay interface-dlci 25
R2(config-fr-dlci)#!
This archive was generated by hypermail 2.1.4 : Tue Apr 01 2008 - 07:53:54 ART