BGP - Question

From: Z Linux (z.linux@hotmail.com)
Date: Thu Mar 27 2008 - 09:35:40 ART

Next message: steveaggie@gmail.com: "RE: Reflexive ACL question IE Solutions Guide"
Previous message: Navid Daghighi: "ip nat inside .. route-map reversible"
Next in thread: femi ogunlana: "RE: BGP - Question"
Maybe reply: femi ogunlana: "RE: BGP - Question"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi 2 all,

I would like to know in the solution why ebgp-multihop is 3

configure EBGP between R1 & R2The peering should be done using Loopback0
interface

R1======<FR>============R3 ( FR Frame-Relay Cloud )

<A>
R1Router BGP 500bgp router-id 2.2.1.1neighbor 2.2.2.2 remote-as 1000neighbor
2.2.2.2 update-source loopback 0neighbor 2.2.2.2 ebgp-multihop 3
R2Router BGP 1000bgp router-id 2.2.2.2neighbor 2.2.1.1 remote-as 1000neighbor
2.2.1.1 update-source loopback 0neighbor 2.2.1.1 ebgp-multihop 3

Next message: steveaggie@gmail.com: "RE: Reflexive ACL question IE Solutions Guide"
Previous message: Navid Daghighi: "ip nat inside .. route-map reversible"
Next in thread: femi ogunlana: "RE: BGP - Question"
Maybe reply: femi ogunlana: "RE: BGP - Question"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue Apr 01 2008 - 07:53:54 ART