From: Todd, Douglas M. (DTODD@PARTNERS.ORG)
Date: Thu Mar 27 2008 - 07:09:09 ART
wrr-queue is on a 3550, srr-queue is on a 3560..
CAT1(config)#int f0/1
CAT1(config-if)#w?
wrr-queue
CAT1(config-if)#do sh ver | i IPSER
Cisco IOS Software, C3550 Software (C3550-IPSERVICESK9-M), Version 12.2(25)SEE,
RELEASE SOFTWARE (fc2)
CAT3(config-if)#srr?
srr-queue
CAT3(config-if)#do sh ver | i IPS
Cisco IOS Software, C3560 Software (C3560-ADVIPSERVICESK9-M), Version
12.2(25)SEE2, RELEASE SOFTWARE (fc1)
________________________________
From: nobody@groupstudy.com on behalf of Moses Polalysa
Sent: Thu 3/27/2008 5:40 AM
To: ccielab@groupstudy.com
Subject: Mapping CoS in Queue
Hi expert,
I have search in Cisco docs and it applies but when I try to put the syntax on
C3560 it rejects.
Anyone know? I am using 12.2 IP Service.
From Cisco docs should be like this:
!
mls qos
!
int fa0/24
wrr-queue cos-map 1 0 1
.....
.....
wrr-queue cos-map 4 5 6
But when I try myself like this:
SW(config)#mls qos
SW(config)#int fa0/24
SW(config-if)#wrr-queue cos-map 1 0 1
^
% Invalid input detected at '^' marker.
Sorry for this silly question. Thanks.
Regards,
Moses
This archive was generated by hypermail 2.1.4 : Tue Apr 01 2008 - 07:53:54 ART