From: Timothy Chin (Tim@1c-solutions.com)
Date: Mon Mar 24 2008 - 15:55:13 ART
Also,
Your since you are using a route-map statement, it should match the
interfaces not the ip network.
Tim
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Daniel Valle
Sent: Monday, March 24, 2008 10:57 AM
To: Noor.Yousuf@shell.com
Cc: ccielab@groupstudy.com
Subject: Re: Redistribution eigrp - ospf -connected
Noor,
you have to include in your redistribute connected ALL interfaces in R2
that
needs to be inside OSPF process. Even the interfaces in EIGRP domain
that
were working fine before you apply the redistribute command.
if you go to R3, you'll that those connected interfaces in R2 that were
in
ospf routing table of R3 will be gone when you apply this redistribute
connected without listing all these interfaces.
HTH,
Daniel
On 3/24/08, Noor.Yousuf@shell.com <Noor.Yousuf@shell.com> wrote:
>
> Experts,
>
> Quick question for all of you
>
> Connected interface(G0/1)---R2------ospf over FR-----R3
> |
> |
> EIGRP(G0/0)----R5
>
> When I use simple mutual redistribution b/w OSPF and EIGRP, it does
work
> fine, as soon as I try to redistribute connected interface into OSPF
which
> is not part of any routing protocol through Route-map, my EIGRP
network gets
> drop on R3....any thoughts will be appreciated
>
> Here is the config of R2
>
> interface GigabitEthernet0/0
> ip address 16.16.17.2 255.255.255.0
> duplex auto
> speed auto
> !
> interface GigabitEthernet0/1
> ip address 150.5.16.1 255.255.255.0
> duplex auto
> speed auto
> !
> interface Serial0/0/0
> ip address 16.16.12.2 255.255.255.248
> encapsulation frame-relay
> ip ospf priority 0
> frame-relay map ip 16.16.12.3 413 broadcast
> frame-relay map ip 16.16.12.5 413 broadcast
> no frame-relay inverse-arp
> frame-relay lmi-type cisco
>
> router eigrp 16
> redistribute ospf 1 metric 1500 1 255 1 1500
> network 16.16.17.2 0.0.0.0
> no auto-summary
> !
> router ospf 1
> router-id 2.2.2.2
> log-adjacency-changes
> redistribute connected metric 100 subnets route-map bb2
> redistribute eigrp 16 metric 50 subnets
> network 2.2.2.2 0.0.0.0 area 0
> network 16.16.12.2 0.0.0.0 area 0
> !
> ip prefix-list bb2 seq 5 permit 150.5.16.0/24
>
> route-map bb2 permit 10
> match ip address prefix-list bb2
>
>
This archive was generated by hypermail 2.1.4 : Tue Apr 01 2008 - 07:53:54 ART