From: omair naim (omairnaim1@hotmail.com)
Date: Fri Mar 21 2008 - 19:39:00 ART
You can use end to end frame relay keep alives in order to track far end for
up/up or up/down.
Later
Omair> Subject: RE: HSRP with Frame relay tracking> Date: Fri, 21 Mar 2008
02:51:55 -0400> From: Tim@1c-solutions.com> To: Tim@1c-solutions.com;
nagendranainar@yahoo.co.in; ccielab@groupstudy.com> > Nevermind my previous
answer. I mis-read the question thinking that you> meant if the interface was
down. Sorry.> > Tim> > -----Original Message-----> From: nobody@groupstudy.com
[mailto:nobody@groupstudy.com] On Behalf Of> Timothy Chin> Sent: Friday, March
21, 2008 2:49 AM> To: nagendra kumar; ccielab@groupstudy.com> Subject: RE:
HSRP with Frame relay tracking> > Just remove your frame-relay map ip
statements.> > Tim> > -----Original Message-----> From: nobody@groupstudy.com
[mailto:nobody@groupstudy.com] On Behalf Of> nagendra kumar> Sent: Thursday,
March 20, 2008 8:57 AM> To: ccielab@groupstudy.com> Subject: HSRP with Frame
relay tracking> > Hi All,> > (104) |-------------------R4 (401)>
R1---------------|> (102) |-------------------R2 (201)> > In the above
topology, DLCIs 104 and 102 are configured on physical> interface of R1. Now
If I need to configure HSRP in R1's ethernet> interface and make it as active
only if the frame relay interface is up> and running. > > How can I check if
the FR interface is up?. As we have confgiured the> DLCIs in physical
interface, it wont bring down the interface if the> other side loses the
connection and because I ahve 2 DLCIs, I cannot> configure object tracking.> >
Can some one please let me know how to go with this scenario?. Am I> missing
any other simple solution?.> > Regards,> Nagendra> > > >
---------------------------------> Be a better friend, newshound, and
know-it-all with Yahoo! Mobile. Try> it now.> >
This archive was generated by hypermail 2.1.4 : Tue Apr 01 2008 - 07:53:54 ART