From: dara tomar (wish2ie@gmail.com)
Date: Wed Mar 19 2008 - 15:35:01 ART
*I don't use MAC,
Have you checked this:
http://www.internetworkexpert.com/resources/ccie_dynamips_mac_osx.htm
may be of some help,
the attachment is filtered, kindly paste the error logs in text format that
will help us .....
Regards,
Dara*
On Wed, Mar 19, 2008 at 10:41 PM, Ajay Prakash <
ajay.prakash@networkpeople.co.in> wrote:
> Hi,
>
> I would very much appreciate if someone could help me out setting up
> dynagen
> on my new iMAC. I have given it a try but due to lack of knowledge about
> MAC
> systems, have bitterly failed and have no clue of how to troubleshoot. I
> have the following hardware:
>
> iMAC with Leopard OS and 1 Gig of ram. Once I have dynagen working, I plan
> on upgrading to 2 gig.
>
> Below is the summary of steps that I took to install:
>
> 1. Downloaded GNS3-0.3.src
> 2. Installed the dev tools from Leopard OS media
> 3. Downloaded python-2.5.2-macosx and installed it
> 4. Downloaded qt-mac-opensource-4.3.4 and installed it
> 5. Downloaded sip-4.7.4.tar.gz (Instructions said to compile and install
> it.
> I executed the following commands:
> a. python configure.py
> b. make install
> 6. Downloaded PyQt-mac-gpl-4.3.3.tar.gz and executed the following
> commands:
> a. python configure.py
> b. make install (This process ran for around 5-6 minutes and terminated
> with an error. I copied the error and have attached it with this email.
>
> Any help would be appreciated.
>
> Regards,
> Ajay Prakash
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Apr 01 2008 - 07:53:54 ART