From: C Chan (cch.ccie@gmail.com)
Date: Mon Mar 17 2008 - 23:08:46 ART
hi all experts,
Is there any windows buddy tool that can generate a CRC ethernet frame error
in cisco device?
Regards,
CH
SW_3560#s int fa0/1
FastEthernet0/1 is up, line protocol is up (connected)
1 minute input rate 33000 bits/sec, 53 packets/sec
1 minute output rate 41000 bits/sec, 61 packets/sec
3721716809 packets input, 3349318567 bytes, 0 no buffer
Received 966426 broadcasts (0 multicast)
0 runts, 0 giants, 0 throttles
0 input errors, 89 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 526916 multicast, 0 pause input
0 input packets with dribble condition detected
101994607 packets output, 2082354208 bytes, 0 underruns
0 output errors, 0 collisions, 1 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier, 0 PAUSE output
0 output buffer failures, 0 output buffers swapped out
This archive was generated by hypermail 2.1.4 : Tue Apr 01 2008 - 07:53:53 ART