From: darth router (darklordrouter@gmail.com)
Date: Mon Mar 17 2008 - 12:22:30 ART
Jack,
building the lab is not hard, but it is time consuming creating all the
initial configs for the specific labs in the VOl 1 workbook, or instead of
using the prebuild topology with 4 switches, or 2 switches, you can scale it
down to a single switch, etc... and create more CPU efficient laptop
versions for study on the go, etc... Create .net files with the initial
configs for EACH sub lab, so it can be instantly fired up without config
waste time. That's what I'm talking about.
DR
On 3/17/08, Jack Flash <jack.flash@inbox.com> wrote:
>
> Darth,
>
> I keep meaning to bring together all the info necessary to build a ccie
> lab with dynamips.... but time hasn't been on my side recently.
>
> I've setup a wiki here
>
> http://dynamips-wiki.no-ip.org/pmwiki/pmwiki.php?n=Dynamips.DynamipsForTheCCIE
> which if you want to have a play with you're more than welcome. You
> should be able to upload the files and provide links. If you're
> interested of course!
>
> Currently there is no info on there, but hopefuly I'll get around to
> describing my setup and adding ipexpert configs.
>
> The uploads password is cciecisco
>
> Regards
>
> Jack
>
>
>
> darth router wrote:
> > Just curious if anyone took the time to build these and wants to share.
> I
> > created one for NAT and Multicast. By creating these, I mean slimming
> them
> > down, taking out the unessesary FR stuff, and leaving it at two switches
> > (3640 with switch modules) with all the proper common config, etc...
> >
>
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Apr 01 2008 - 07:53:53 ART