From: Tony Schaffran \(GS\) (groupstudy@cconlinelabs.com)
Date: Fri Mar 14 2008 - 15:06:02 ARST
Although this is not a recommended configuration, you can telnet to the
outside interface. You just need to create a static NAT to itself and
enable telnet access on the outside interface.
If you want to allow access to the PIX from the outside, I would recommend
SSH as a minimum and even go as far as VPN access to administer the PIX.
Tony Schaffran
Network Analyst
CCIE #11071
CCNP, CCNA, CCDA,
NNCDS, NNCSS, CNE, MCSE
www.cconlinelabs.com
Your #1 choice for online Cisco rack rentals.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Carlos G Mendioroz
Sent: Friday, March 14, 2008 9:59 AM
To: ccielab@groupstudy.com
Subject: OT?: What makes the outside interface "outside" ?
Pixen do not allow telnet to the outside interface w/o ipsec.
There are a number of ways out (ipsec, static to inside, etc).
But what makes an interface an "outside" interface ? The name ?
The sec level ? Just curious if somebody knows (and lazy to go
and lab it up!)
Regards,
-Carlos
-- Carlos G Mendioroz <tron@huapi.ba.ar> LW7 EQI Argentina
This archive was generated by hypermail 2.1.4 : Tue Apr 01 2008 - 07:53:53 ART