From: PANDI MOORTHY (moorthypandi@gmail.com)
Date: Thu Mar 13 2008 - 15:44:54 ARST
My understanding is EEK effective only when we apply it on to the sub
interface
Regards
pandi
On 3/13/08, Shine Joseph <shinepjoseph@iprimus.com.au> wrote:
>
> Akhil,
>
> Yes, you can use EEK to track the pvc status. But, how will you apply this
> to track HSRP/VRRP?
>
> Any comments welcome.
>
> Regards,
> Shine
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> AKHILESH THAKUR
> Sent: Thursday, 13 March 2008 10:38 PM
> To: Adel Karim; YourPal
> Cc: Cisco certification
> Subject: RE: HSRP tracking of Frame Relay physical interface
>
> Dear Emil,
> I think you can use End to End keepalive option to track the pvc status.
>
> Regards
> Akhi> Date: Thu, 13 Mar 2008 13:00:20 +0200> From: adelkarim@gmail.com>
> To:
> dearprudence28@gmail.com> Subject: Re: HSRP tracking of Frame Relay
> physical
> interface> CC: ccielab@groupstudy.com> > Hi Emil,> > Yes, in this case you
> should create a GRE tunnel with keepalives to be able> to track the PVC
> state.> > Of course there are other means of tracking that you can use
> like
> route> reachability or SLA.> > I don't think the proctor will be helping
> you
> here since he/she will be> telling you how to answer the question.> > HTH>
> Adel Karim Mansour> > > On Thu, Mar 13, 2008 at 12:50 PM, YourPal
> <dearprudence28@gmail.com> wrote:> > > Hi Group,> >> > I have a HSRP and
> frame
> relay setup as follows:> >> > R5 (fa0/0)--------(fa0/0) R1
> (s0/0/0)------FrameRelay------(s0/0/0.125 mp)> > R2> >> > R1:> > int
> s0/0/0>
> >
> ip add 10.10.125.1 255.255.255.0> > enca fram> > no frame inver> > fram
> map
> ip
> 10.10.125.2 102 br> > !> > int f0/0> > ip add 10.10.15.1 255.255.255.0> >
> stand 1 ip 10.10.15.254> > stand 1 prio 110> > stand 1 preempt> > stand 1
> track Serial0/0/0 20> > !> >> > R5:> > int fa0/0> > ip add 10.10.15.5
> 255.255.255.0> > stand 1 ip 10.10.15.254> > stand 1 preempt> > !> >> >
> Say,
> R5
> need to take over the HSRP active role if R1's frame relay> > connection
> is
> down. I understand that if we have a frame relay connection> > using
> physical
> interface, the interface will never go down as long as LMI> > is> >
> working
> fine.> >> > In this case, the HSRP tracking is effective if int s0/0/0
> itself
> is down> > but not when int s0/0/0 on R2 is down. Correct me if I'm wrong.
> To
> work> > around, are you bothered to configure a GRE tunnel (with
> keepalive)>
> >
> between> > R1 and R2 and track this tunnel interface in HSRP on R1?> >> >
> I
> may be overthinking. I'd like to hear your opinion. It's best to clarify>
> >
> with the proctor in the real lab to clear any ambiguity.> >> >> > Thank
> you.>
> >> > BR,> > Emil> >> >
> _______________________________________________________________________> >
> Subscription information may be found at:> >
> http://www.groupstudy.com/list/CCIELab.html> >> > > > -- > Regards> Adel
> Karim
> Mansour> CCIE# 20147 R&S> >
> _______________________________________________________________________>
> Subscription information may be found at: >
> http://www.groupstudy.com/list/CCIELab.html
> _________________________________________________________________
> Post free property ads on Yello Classifieds now! www.yello.in
> http://ss1.richmedia.in/recurl.asp?pid=219
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Apr 01 2008 - 07:53:53 ART