From: WorkerBee (ciscobee@gmail.com)
Date: Tue Mar 11 2008 - 07:41:32 ARST
You need to buy Inline Power Supply for your router if you do not have it.
A ILS power supply has a little black IP Phone logo at the A/C input
which is visible from the back of the router. I was caught this this
situation before. Thanks to Brian Dennis tips.
The part number:
Cisco 2811 Router - Power Supply Ac Inline PWR-2811-AC-IP= Power supply
HTH
On Tue, Mar 11, 2008 at 5:18 PM, Felix Nkansah <felixnkansah@gmail.com> wrote:
> Hi,
>
> I have installed a Cisco Etherwitch module in a Cisco 2811 ISR.
>
> Etherswitch part number is NME-6ES-1G-P.
>
> The router uses an IP power supply.
>
> Yet I have tried all that there is to it, and still the switch ports do not
> power my IP phones.
>
> Is there anything I need to do which I am not doing yet?
>
> When I do "show power inline" in the module, I get the output below in the
> first lines.
>
> Module Available Used Remaining
> (Watts) (Watts) (Watts)
> ------ --------- -------- ---------
> 1 n/a n/a n/a
>
> Regards,
>
> Felix
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Apr 01 2008 - 07:53:53 ART