From: keith tokash (ktokash@hotmail.com)
Date: Mon Mar 10 2008 - 16:15:16 ARST
Precisely. A CCIE I work with has repeatedly warned me about overthinking the
problem. He says that's a big reason he failed twice. 3rd time he did what
the task asked for and passed.
With a few exceptions, secrecy is deeply incompatible with democracy and with
science.
--Carl Sagan
> From: smorris@ipexpert.com
> To: ktokash@hotmail.com; stephen.skinner@rbs.co.uk; chan_hong33@yahoo.com;
dearprudence28@gmail.com; ccielab@groupstudy.com
> Subject: RE: Enabling OSPF using minimum network statements
> Date: Mon, 10 Mar 2008 14:11:20 -0400
>
> It's all about perception... When in doubt, alter yours just a little,
and
> amazing things make sense. :)
>
>
http://www.cisco.com/en/US/docs/ios/iproute/command/reference/irp_osp1.html#
> wp1013708
>
>
> Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, JNCIE-M
> #153, JNCIS-ER, CISSP, et al.
> CCSI/JNCI-M/JNCI-ER
> VP - Technical Training - IPexpert, Inc.
> IPexpert Sr. Technical Instructor
>
> A Cisco Learning Partner - We Accept Learning Credits!
>
> smorris@ipexpert.com
>
>
>
> Telephone: +1.810.326.1444
> Fax: +1.810.454.0130
> http://www.ipexpert.com
>
>
>
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> keith tokash
> Sent: Monday, March 10, 2008 2:03 PM
> To: Skinner, Stephen; Chan Hong; YourPal; Cisco certification
> Subject: RE: Enabling OSPF using minimum network statements
>
> I saw this topic in the IE forums and my response was the same there as it
> is now. The minimum number of network statements required to put those
> networks into OSPF is zero.
>
> With a few exceptions, secrecy is deeply incompatible with democracy and
> with science.
> --Carl Sagan
>
> > From: Stephen.Skinner@rbs.co.uk
> > To: chan_hong33@yahoo.com; dearprudence28@gmail.com;
> > ccielab@groupstudy.com
> > Subject: RE: Re: Enabling OSPF using minimum network statements
> > Date: Mon, 10 Mar 2008 13:10:43 +0000
> >
> > If there is another task , then I would use 154.1.0.0 0.0.255.255
> > instead
> >
> > HTH
> >
> > Stephen
> >
> >
> > mail: Stephen.Skinner@rbs.co.uk
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]
> > Sent: 10 March 2008 12:12
> > To: YourPal; Cisco certification
> > Subject: Re: Enabling OSPF using minimum network statements
> >
> > If there is another task request you to enable another ospf area on
> > int fa0/0 and s0/0. Then can I use "network 0.0.0.0 0.0.0.0 area 0" to
> > meet this task requirement??
> >
> >
> > ----- 6l%s-l%s ----
> > 1H%s$H!R YourPal
> > <dearprudence28@gmail.com>
> > &,%s$H Cisco certification <ccielab@groupstudy.com> 6G0e$i4A!R 2008 &~
> > 3$k 9 $i ,P4A$i $U$H 8:24:11 %DCD!G Enabling OSPF using minimum
> > network statements
> >
> > Hi Group,
> >
> > A router has the following IP
> > addresses:
> >
> > !
> > interface FastEthernet0/0
> > ip address 154.1.38.3 255.255.255.0
> > !
> > interface FastEthernet0/1
> > ip address 154.1.3.3 255.255.255.0
> > !
> > interface
> > Serial0/0
> > ip address 154.1.0.3 255.255.255.0
> > !
> > interface Serial0/2
> > ip address
> > 154.1.13.3 255.255.255.0
> > !
> > interface Serial0/3
> > ip address 154.1.23.3
> > 255.255.255.0
> > !
> >
> > The task requires to enable OSPF area 0 on interfaces Fa0/1, s0/2, and
> > s0/3 using the minimum amount of network statements necessary. Do not
> > enable area 0 on any other interfaces.
> >
> > As hard as I tried, I'm not able
> > to use minimum network statements to cover those 3 interfaces without
> > covering s0/0. So I configured 3 statements as follows (to me, this is
> > the min.):
> >
> > !
> > router ospf 1
> > network 154.1.3.3 0.0.0.0 area 0
> > network 154.1.13.3 0.0.0.0 area
> > 0
> > network 154.1.23.3 0.0.0.0 area 0
> > !
> >
> > Let me know if you have a solution that meets the task requirement.
> >
> >
> > Thank you.
> >
> > BR,
> > Emil
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> > Yahoo!
> > :t$W&w%~'p2$!A1P'A&p&s(>=d6B+H! 8T1!%i0Q>\
> > http://hk.promo.yahoo.com/security/index.html $F8Q's&h!
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> > *** WARNING : This message originates from the Internet ***
> > The Royal Bank of Scotland plc, Registered in Scotland No. 90312.
> Registered
> Office: 36 St Andrew Square, Edinburgh EH2 2YB
> >
> > Authorised and regulated by the Financial Services Authority.
> >
> > This e-mail message is confidential and for use by the addressee only. If
> the message is received by anyone other than the addressee, please return
> the
> message to the sender by replying to it and then delete the message from
> your
> computer. Internet e-mails are not necessarily secure. The Royal Bank of
> Scotland plc does not accept responsibility for changes made to this
message
> after it was sent.
> >
> > Whilst all reasonable care has been taken to avoid the transmission of
> viruses, it is the responsibility of the recipient to ensure that the
onward
> transmission, opening or use of this message and any attachments will not
> adversely affect its systems or data. No responsibility is accepted by The
> Royal Bank of Scotland plc in this regard and the recipient should carry
out
> such virus and other checks as it considers appropriate.
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _________________________________________________________________
> Connect and share in new ways with Windows Live.
> http://www.windowslive.com/share.html?ocid=TXT_TAGHM_Wave2_sharelife_012008
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
This archive was generated by hypermail 2.1.4 : Tue Apr 01 2008 - 07:53:53 ART