From: Ramy Sisy (ramysisy@ipknowledgenet.com)
Date: Sun Mar 09 2008 - 23:51:26 ARST
Hi Yemi,
Hope below link will help.
http://www.cisco.com/en/US/docs/switches/lan/catalyst3550/software/release/1
2.2_25_see/configuration/guide/swethchl.html#wp1021856
-----------------------------------------------
Thanks,
Ramy Sisy
CCIE#17321 (Security), CCSI#30417
Technical Instructor
http://www.linkedin.com/in/ramysisy
http://www.ccbootcamp.com
Toll Free: 877-654-2243
International: +1-702-968-5100
-----------------------------------------------
----- Original Message -----
From: <ysoyibo@hotmail.com>
To: <ccielab@groupstudy.com>
Sent: Friday, February 01, 2008 3:17 AM
Subject: Port-Channels not coming on
>I have set up my port channels and they are not coming up. I have made sure
>that the interface setting are the same of all interfaces. Also
>'channel-group X mode on' is congfigured on all. I see err-disable on the
>interfaces and the port channels not coming on.
>
> How can I start to troubleshoot this problem and eventually what is(are)
> the probable causes of this keeping in mind what has been said earlier.
>
> Rgds
>
> Yemi
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Apr 01 2008 - 07:53:53 ART