From: trade me (trademeup@hotmail.com)
Date: Sun Mar 09 2008 - 10:38:13 ARST
Hi BR,
It's late,
But my best is 154.1.0.0/20
154.1.[0-15].[0-255]
network 154.1.13.3 0.0.0.15 area 0
matt
----------------------------------------
> Date: Sun, 9 Mar 2008 20:24:11 +0800
> From: dearprudence28@gmail.com
> To: ccielab@groupstudy.com
> Subject: Enabling OSPF using minimum network statements
>
> Hi Group,
>
> A router has the following IP addresses:
>
> !
> interface FastEthernet0/0
> ip address 154.1.38.3 255.255.255.0
> !
> interface FastEthernet0/1
> ip address 154.1.3.3 255.255.255.0
> !
> interface Serial0/0
> ip address 154.1.0.3 255.255.255.0
> !
> interface Serial0/2
> ip address 154.1.13.3 255.255.255.0
> !
> interface Serial0/3
> ip address 154.1.23.3 255.255.255.0
> !
>
> The task requires to enable OSPF area 0 on interfaces Fa0/1, s0/2, and s0/3
> using the minimum amount of network statements necessary. Do not enable area
> 0 on any other interfaces.
>
> As hard as I tried, I'm not able to use minimum network statements to cover
> those 3 interfaces without covering s0/0. So I configured 3 statements as
> follows (to me, this is the min.):
>
> !
> router ospf 1
> network 154.1.3.3 0.0.0.0 area 0
> network 154.1.13.3 0.0.0.0 area 0
> network 154.1.23.3 0.0.0.0 area 0
> !
>
> Let me know if you have a solution that meets the task requirement.
>
>
> Thank you.
>
> BR,
> Emil
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Apr 01 2008 - 07:53:52 ART