From: Carlos Alberto Trujillo Jimenez (carlos.trujillo.jimenez@gmail.com)
Date: Wed Mar 05 2008 - 13:48:42 ARST
Try debuggin IP rip in one or both routers.. there you can see whats goin
on.
http://www.cisco.com/warp/public/105/50.html
2008/3/5, Dinesh Patel <jedidinesh@googlemail.com>:
>
> Hi group
>
> I'm having problems trying to get rip to authenticate MD5 without
> problems...
>
> Is the correct order:
>
> 1) define key chain
> 2) ip rip authentication mode md5 on the interface
> followed by:
> 3) ip rip authentication key-chain RIP
>
> What I find is that I have to take off authentication and off both sides
> of
> the link, get it to work without authentication then apply the
> authentication. But you don't have access to the backbone routers in the
> lab... just wondering it could be a buggy ios.... or is there some hidden
> trick to it?
>
> Dinesh
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Apr 01 2008 - 07:53:52 ART