From: Rich Collins (nilsi2002@gmail.com)
Date: Fri Mar 07 2008 - 15:37:14 ARST
Hi Lui,
I guess you should follow the diagram. Perhaps the mock lab has some
built-in errors (in the startup config) which you should find and correct -
even it means removing or changing an IP address to meet the diagram and any
other requirements.
-Rich
On 3/6/08, Ed Lui <edwlui@gmail.com> wrote:
>
> Hi Rich,
>
> It was an access port on vlan 58. As it was the original config. EIGRP
> neighbor was formed. Everything was OK. I just did not get points for the
> task because per the grader it should be an routed port instead of an access
> port. That's why I am seeking clarification. Was it my problem or it can be
> viewed at a different angle.
>
> :-)
>
> Thanks for your input though,
> Lui
>
> ----- Original Message -----
> *From:* Rich Collins <nilsi2002@gmail.com>
> *To:* Ed Lui <edwlui@gmail.com>
> *Cc:* ccielab@groupstudy.com
> *Sent:* Thursday, March 06, 2008 3:32 PM
> *Subject:* Re: Lab exam SUCCEED or FAILED
>
>
> For part#3 do you think it was possible to make Fa0/20 an access vlan port
> (VLAN 58)? In that case you are not removing the ip address from the SVI
> and almost match the diagram.
>
> On Wed, Mar 5, 2008 at 9:34 PM, Ed Lui <edwlui@gmail.com> wrote:
>
> > I am not sure if everyone can access the diagram. If not, I will post it
> > again.
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Apr 01 2008 - 07:53:52 ART