From: Vazquez, Jorge (Jorge.Vazquez@acs-inc.com)
Date: Fri Mar 07 2008 - 14:02:38 ARST
But, I think if you have some routes in the BGP table under RIB-failure,
those routes are not advertised to the neighbors. So you may not have full
reachability.
Jorge
_____
From: Carlos Alberto Trujillo Jimenez
[mailto:carlos.trujillo.jimenez@gmail.com]
Sent: Friday, March 07, 2008 6:52 AM
To: Vazquez, Jorge
Cc: ccie forum
Subject: Re: BGP Table on the Lab Exam
Jorge.
Adding one more thing.
The presence of a rib-failure and the removing of that, depends of what is
asked to do in the question.
If the question states FULL REACHABILITY with rib-failure works fine.
but if the question states PRESENT IN THE ROUTING TABLE VIA BGP. You may
adjust some configurations as stated in my last mail, to let it work.
2008/3/7, Carlos Alberto Trujillo Jimenez <carlos.trujillo.jimenez@gmail.com
<mailto:carlos.trujillo.jimenez@gmail.com> >:
Hi Jorge.
A Rib Failure happens when a prefix is present in the bgp table, as well as
in the routing, means the router recibes the same prefix via IBGP as well as
ANY IGP (OSPF, RIP, EIGRP).
According to the administrative distance ANY IGP is prefered over any IBGP
ROUTE. Thats why the route is still present in the routing table, but
learned via any of the IGP you are using in your network.
If you have a RIB-FAILURE you can test it and it must work fine, you must
have reachability to that prefix.
From the BGP point of view, that route present in the bgp table (as
RIB-FAILURE) is still propagated via bgp to its neighbors.
if you want to remove the RIB-FAILURE in your bgp table you may adjust the
ADMIN DISTANCE of the IGP to be higher than the IBGP or may REDUCE the IBGP
admin distance to be lower than the IGP.
cheers.
2008/3/7, Vazquez, Jorge <Jorge.Vazquez@acs-inc.com
<mailto:Jorge.Vazquez@acs-inc.com> >:
Any advice or comment about this? I would like to know what is correct
solution when a RIB-failure appears, cause trying to fix that may impact the
routing in all the network topology and maybe it may not be necessary.
Jorge
_____
From: Vazquez, Jorge
Sent: Thursday, March 06, 2008 10:29 AM
To: ccie forum
Subject: BGP Table on the Lab Exam
I have completed some IE labs in the last days, I have one question about
the BPG table, in case I get some routes with RIB-failure, do I have to fix
that or is that ok to have some routes on RIB-failure?
Regards,
Jorge
This archive was generated by hypermail 2.1.4 : Tue Apr 01 2008 - 07:53:52 ART