From: Scott Vermillion (scott_ccie_list@it-ag.com)
Date: Sat Mar 01 2008 - 20:50:16 ARST
Hey Moe,
Have you spent any time on the DocCD for this one? I think you need to key
in on SRR vs WRR...
http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/1
2.2_25_sec/command/reference/cli3.html
The differences aren't really documented very well in any of the Cisco Press
books that I'm aware of, so you'll either want to dig through this yourself
or consider one of the training vendor products. IIRC, this is covered in
the IE ATC CoD. Also, the NetMasters guys have a really good Cat QoS
training video for sale on their site. But I think you can work through
most of it if you spend some time on the DocCD and also just mucking
around...
Regards,
Scott
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
cisco-addicted
Sent: Saturday, March 01, 2008 3:35 PM
To: ccielab@groupstudy.com
Subject: WRR COS
Dears,
I am trying to configure WRR CoS maps value In 3560 switch running advanced
IP service IOS image (c3560-advipservicesk9-mz.122-25.SEE3.bin).
The problem that the commands like wrr-queue cos-map & wrr-queue bandwidth
not recognized by the IOS, and I am sure this is the highest IOS for this
platform and also the same the real CCIE R&S lab using.
May any one help in this issue.
Regards
Moe.
This archive was generated by hypermail 2.1.4 : Tue Apr 01 2008 - 07:53:51 ART