test ignore plz

From: maz hussain (mmgnoc@hotmail.co.uk)
Date: Thu Feb 28 2008 - 08:12:47 ARST


test means delete

--------------------------------------------------
From: "Carlos Trujillo Jimenez" <nergal888@hotmail.com>
Sent: Monday, February 25, 2008 2:28 AM
To: "Tandou Mohamed" <dtandou@yahoo.com>; <ccielab@groupstudy.com>
Subject: RE: ip igmp access-group or ip igmp profile 40

> The Igmp access-group command is for a ROUTED PORT, and the igmp filter
> command is for a SWITCHED PORT.
>
> Both are using for filtering, but the access-group one is used in a layer
> 3
> port, who can filter for the entire lan segment who is connected to.
>
> If you have a scenario where in a given lan you want to filter only to
> some
> hosts the access to a a give multicast stream, you can filter them
> directly at
> the switch layer 2 port with the igmp profile.
>
>
> http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.1/12ew/configura
> tion/guide/multi.html#wp1047701
>
>
>> Date: Sat, 23 Feb 2008 11:46:18 -0800> From: dtandou@yahoo.com> Subject:
>> ip
> igmp access-group or ip igmp profile 40> To: ccielab@groupstudy.com> >
> Hello
> GS,> what's the difference between ip igmp access-group or ip igmp profile
> ? >
> if i configure my switch like this ? will both commands will give same
> result
> ?> Can someone explain ? i am reading the Doc Cd looks like same thing to
> me
> don't know if i am wrong.> > > access-list 1 225.2.2.2 0.0.0.0 > > >
> interface
> fa0/24 ip igmp access-group 1> > or > > > Switch(config)# ip igmp profile
> 8 >
>> > Switch(config-igmp-profile)# permit > > > Switch(config-igmp-profile)#
> range 233.1.1.1 233.255.255.255> > > > interface FastEthernet0/1> > ip
> igmp
> filter 8> > > > Mohamed> > > > > > --------------------------------->
> Never
> miss a thing. Make Yahoo your homepage.>
> _________________________________________________________________
> Explore the seven wonders of the world
> http://search.msn.com/results.aspx?q=7+wonders+world&mkt=en-US&form=QBRE



This archive was generated by hypermail 2.1.4 : Sat Mar 01 2008 - 16:54:50 ARST