From: Neil Moore (neil@droopy.com)
Date: Thu Feb 28 2008 - 03:05:03 ARST
Could you show us the whole config on that fas0/0 ?
Neil Moore wrote:
> how about
> ip route 209.85.173.104 255.255.255.255 (interface name) such as fas0/0
>
> -Neil
>
> Joshua wrote:
>> Hi,
>>
>> I have a problem to add a static route via exiting interface. If i
>> give it
>> next hop ip, it will work. Why?
>> (1) Use next hop ip address:
>> ...
>> ip route 209.85.173.104 255.255.255.255 24.239.17.25
>> ..
>>
>> VanVPN#ping 209.85.173.104
>>
>> Type escape sequence to abort.
>> Sending 5, 100-byte ICMP Echos to 209.85.173.104, timeout is 2 seconds:
>> !!!!!
>>
>> (2) Use local exiting interface:
>> ...
>> ip route 209.85.173.104 255.255.255.255 f0/0
>> ..
>>
>> VanVPN#ping 209.85.173.104
>>
>> Type escape sequence to abort.
>> Sending 5, 100-byte ICMP Echos to 209.85.173.104, timeout is 2 seconds:
>> .....
>>
>> Troubleshooting:
>>
>> (1) when use exiting interface, i see in arp as below.
>>
>> VanVPNr# sh ip arp
>> Protocol Address Age (min) Hardware Addr Type Interface
>> ...
>>
>> Internet 209.85.173.104 0 Incomplete ARPA
>> Internet 24.239.17.11 - 0019.0618.6fb0 ARPA
>> FastEthernet0/0
>> Internet 24.239.17.25 228 00a0.8ea5.2ea0 ARPA
>> FastEthernet0/0
>>
>> Please help what i did wrong!
>>
>>
>>
>> Thanks,
>>
>> Josh
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2008 - 16:54:50 ARST