From: Scott Vermillion (scott_ccie_list@it-ag.com)
Date: Mon Feb 25 2008 - 19:41:06 ARST
Do a 'sh controllers' on both ends of the link and have a look at the
differences...
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of John
Sent: Monday, February 25, 2008 2:37 PM
To: ccielab@groupstudy.com
Subject: hdlc clock rate
I've got 2 routers R2 and R3 that I'm supposed to connect with hdlc. I ran
into a problem I've never seen before. When I apply the clock rate command
on
R2 the circut wouldn't come up. I then do a no clock rate on R2 and apply
it
on R3 the circut comes up. I have stac compression enabled on the
interfaces.
I don't know if that makes a difference.
I didn't think it mattered which end I applied the clock rate command to.
If
someone can shine a light on this issue I would greatly appreciate it.
JG
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2008 - 16:54:49 ARST